EUVIMEDEUVIMED entdecken
Crossref

Asymmetric Ultrathin Salt-Rich Composite Polymer Electrolyte Formed by Spin Coating for High-Performance Lithium Metal Batteries

Shuaitian Jia, Linxin Yang, Yanpei Wang, Lifeng Zhang, Langli Luo iD

ACS Applied Materials & Interfaces · 05.08.2026 · 18 (30) · 42079-42087

DOI: 10.1021/acsami.6c08312 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 09.07.2026. Verfasst von Shuaitian Jia und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Molecular Plus, Department of Chemistry, Tianjin University, Tianjin300072, China. Die Arbeit nennt 28 Literaturangaben. Gefördert von: National Natural Science Foundation of China (NSFC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid-state lithium metal batteries (SSLMBs) are being intensively explored as next-generation energy storage solutions, combining high energy density with enhanced safety. However, conventional composite polymer electrolytes face critical challenges including low room-temperature ionic conductivity, limited lithium ion (Li+) transference numbers, and mechanically incompatible interfaces. Herein, we design a spin-coated asymmetric high-salt polymer electrolyte where a polyvinylidene fluoride (PVDF) framework spans the entire membrane while a sulfolane-containing polyethylene oxide (PEO)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-rich cathode-side layer establishes a high-dielectric microenvironment. This converts ion aggregates into free Li+ coordinated with ether oxygens, endowing the cathode side with low interfacial impedance and a robust solid electrolyte interphase (CEI). Meanwhile, the anode side maintains high modulus and homogenized Li+ flux to suppress dendrite growth. Dispersed lithium lanthanum titanate (LLTO) fillers further construct an inorganic percolated pathway for Li+ transport. This spin-coated asymmetric electrolyte achieves an optimized Li+ transference number of 0.78. Full cells paired with lithium iron phosphate (LFP) and Li anodes deliver 82.5% capacity retention after 500 cycles accompanied by nearly 100% Coulombic efficiency and excellent rate-capability recovery. Our results highlight the potential of this asymmetric high-salt polymer electrolyte platform for developing thin, high-energy density SSLMBs.

Schlagwörter

Stichwörter der Autor:innen

LLTOLi metal batteriesasymmetriccomposite polymer electrolytehigh-salt electrolytesulfolane

Autor:innen und Institutionen

  • Institute of Molecular Plus, Department of Chemistry, Tianjin University, Tianjin300072, China.
  • Haihe Laboratory of Sustainable Chemical Transformations, Tianjin300072, China.

ORCID-Profile: Langli Luo

Förderung

  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Jia, S., Yang, L., Wang, Y., Zhang, L., & Luo, L. (2026). Asymmetric Ultrathin Salt-Rich Composite Polymer Electrolyte Formed by Spin Coating for High-Performance Lithium Metal Batteries. ACS Applied Materials & Interfaces, 18(30), 42079-42087. https://doi.org/10.1021/acsami.6c08312

Vancouver

Jia S, Yang L, Wang Y, Zhang L, Luo L. Asymmetric Ultrathin Salt-Rich Composite Polymer Electrolyte Formed by Spin Coating for High-Performance Lithium Metal Batteries. ACS Applied Materials & Interfaces. 2026;18(30):42079-42087. doi:10.1021/acsami.6c08312

BibTeX
@article{Jia2026,
  author = {Jia, Shuaitian and Yang, Linxin and Wang, Yanpei and Zhang, Lifeng and Luo, Langli},
  title = {Asymmetric Ultrathin Salt-Rich Composite Polymer Electrolyte Formed by Spin Coating for High-Performance Lithium Metal Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {30},
  pages = {42079--42087},
  doi = {10.1021/acsami.6c08312}
}
Kostenlos starten →