Dual-Functional Metallized Basalt Fiber with Exceptional Electromagnetic Interference Shielding and Joule Heating Capabilities under Simulated Lunar Temperature Conditions
ACS Applied Materials & Interfaces · 22.07.2026 · 18 (28) · 39093-39105
DOI: 10.1021/acsami.6c07813 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 29.06.2026. Verfasst von Che Zhou und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science & Engineering, Key Laboratory of Functional Textile Material and Product of the Ministry of Education, Xi'an Key Laborato…. Die Arbeit nennt 60 Literaturangaben. Gefördert von: China National Textile and Apparel Council, Natural Science Basic Research Program of Shaanxi Province, Science and Technology Planning Project of Xi?an Beilin District.
Abstract (Originalsprache)
The lunar mare region is rich in basaltic minerals, and in situ resource utilization (ISRU) is a fundamental strategy for sustainable extraterrestrial construction. However, combining electroless plating with basalt fibers for such construction leads to a significant mismatch of coefficient of thermal expansion (CTE) between the fiber substrate and metal coating. Under extreme temperature alternations, this mismatch induces interfacial thermal stress concentration, causing coating peeling and performance failure. To address this issue, this study, using commercial terrestrial basalt fiber as an analogue for lunar basaltic materials, proposes an ISRU-inspired metallized fiber composite suitable for wide-temperature-range applications. By sequential electroless nickel plating and copper electroplating on basalt fibers, a nickel-copper-coated basalt fiber fabric (BF@Ni@Cu) was successfully fabricated, exhibiting high electrical conductivity, excellent electromagnetic interference shielding effectiveness (62.59 dB), and significant joule heating performance. The Ni interlayer forms a CTE gradient transition between the basalt substrate and the outer Cu layer, mitigating interfacial thermal stress. After annealing and PDMS encapsulation, the surface reflection characteristics are effectively regulated. To verify reliability under lunar diurnal temperature variations, cold-thermal shock cycle tests simulating the lunar range (from -196 to 130 °C) are conducted. After 30 cycles, the material maintained structural integrity without cracking or peeling, successfully overcoming interfacial thermal stress concentration. Consequently, the EMI shielding and joule heating performance showed only slight degradation, demonstrating excellent temperature shock resistance. This study not only provides a fiber metallization strategy that retains high performance under extreme temperature alternations but also offers a potential technical pathway inspired by ISRU for multifunctional protection and thermal management materials in future lunar base construction, through the design concept of thermal stress alleviation and failure-mode control via a gradient interlayer.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science & Engineering, Key Laboratory of Functional Textile Material and Product of the Ministry of Education, Xi'an Key Laboratory of Textile Composites, Xi'an Polytechnic University, Xi'an, Shaanxi…
- Key Laboratory of Biomedical Information Engineering of Ministry of Education, School of Life Science and Technology, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China.
- College of Chemistry and Chemical Engineering, Xi'an Shiyou University, Xi'an, Shaanxi 710065, China.
ORCID-Profile: Tao Fu, Jian Huang, Dongzhen Chen
Förderung
- China National Textile and Apparel Council
- Natural Science Basic Research Program of Shaanxi Province
- Science and Technology Planning Project of Xi?an Beilin District
- Ministry of Education Key Laboratory of Functional Textile Material and Product, Xi'an Polytechnic University
Zitieren
APA
Zhou, C., Zhao, L., Hui, L., Yang, Z., Fu, T., Huang, J., & Chen, D. (2026). Dual-Functional Metallized Basalt Fiber with Exceptional Electromagnetic Interference Shielding and Joule Heating Capabilities under Simulated Lunar Temperature Conditions. ACS Applied Materials & Interfaces, 18(28), 39093-39105. https://doi.org/10.1021/acsami.6c07813
Vancouver
Zhou C, Zhao L, Hui L, Yang Z, Fu T, Huang J, et al. Dual-Functional Metallized Basalt Fiber with Exceptional Electromagnetic Interference Shielding and Joule Heating Capabilities under Simulated Lunar Temperature Conditions. ACS Applied Materials & Interfaces. 2026;18(28):39093-39105. doi:10.1021/acsami.6c07813
BibTeX
@article{Zhou2026,
author = {Zhou, Che and Zhao, Lin and Hui, Lei and Yang, Zeyu and Fu, Tao and Huang, Jian and Chen, Dongzhen},
title = {Dual-Functional Metallized Basalt Fiber with Exceptional Electromagnetic Interference Shielding and Joule Heating Capabilities under Simulated Lunar Temperature Conditions},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {28},
pages = {39093--39105},
doi = {10.1021/acsami.6c07813}
}
EUVIMED