EUVIMEDEUVIMED entdecken
Crossref

Effect of Strain Induced by Varying Bottom Electrode Thicknesses on Ferroelectric Properties of Pt/Al0.7Sc0.3N/Pt Capacitors

Yuan Fang, Xiaoxi Li iD, Jiawei Li, Haiwen Xu, Cizhe Fang, Xiangyu Zeng, Jishen Zhang, Siying Zheng, Tao Wu iD, Chengji Jin, Jiajia Chen, Haoji Qian und 4 weitere

ACS Applied Materials & Interfaces · 05.08.2026 · 18 (30) · 41219-41225

DOI: 10.1021/acsami.6c07798 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 25.07.2026. Verfasst von Yuan Fang und 15 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Integrated Circuit, Xidian University, Xi'an710071, China. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Natural Science Foundation of Shanghai Municipality, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum scandium nitride (Al1–xScxN) has emerged as a promising candidate for next-generation nonvolatile memories owing to its excellent large remanent polarization (Pr), high Curie temperature, and CMOS compatibility. However, its ferroelectric characteristics are highly sensitive to strain, which limits device scalability. Herein, we systematically investigate the effect of the relative vertical strain, modulated via the bottom electrode thickness, on the ferroelectric behavior of Pt/Al0.7Sc0.3N/Pt capacitors. The X-ray diffraction analysis reveals that increasing the Pt thickness from 10 to 50 nm reduces the relative vertical strain from 0.27 to –0.26%. The optimized 50 nm Pt electrode yields a lower coercive field (Ec = 4.38 MV/cm) and enhanced remanent polarization (2Pr = 287.72 μC/cm2). First-principles calculations indicate that the reduced relative vertical strain decreases the energy barrier for polarization reversal, accounting for the lower Ec. Meanwhile, the temperature-dependent leakage analysis and theoretical modeling show that the smaller relative vertical strain decreases the trap energy level and the nitrogen-vacancy formation energy, resulting in the increased leakage. These findings establish a clear correlation between electrode-induced strain and ferroelectric properties in AlScN, providing guidance for strain engineering in high-density ferroelectric memory integration.

Schlagwörter

Stichwörter der Autor:innen

AlScNbottom electrodeferroelectricleakage currentrelative vertical strain

Autor:innen und Institutionen

  • Faculty of Integrated Circuit, Xidian University, Xi'an710071, China.
  • Hangzhou Institute of Technology, Xidian University, Hangzhou311231, China.
  • School of Information Science and Technology, Shanghai Engineering Research Center of Energy Efficient and Custom AI IC, ShanghaiTech University, Shanghai201210, China.

ORCID-Profile: Xiaoxi Li, Tao Wu, Yan Liu

Förderung

  • Natural Science Foundation of Shanghai Municipality
  • National Natural Science Foundation of China

Zitieren

APA

Fang, Y., Li, X., Li, J., Xu, H., Fang, C., Zeng, X., Zhang, J., Zheng, S., Wu, T., Jin, C., Chen, J., Qian, H., Li, B., Liu, Y., Hao, Y., & Han, G. (2026). Effect of Strain Induced by Varying Bottom Electrode Thicknesses on Ferroelectric Properties of Pt/Al0.7Sc0.3N/Pt Capacitors. ACS Applied Materials & Interfaces, 18(30), 41219-41225. https://doi.org/10.1021/acsami.6c07798

Vancouver

Fang Y, Li X, Li J, Xu H, Fang C, Zeng X, et al. Effect of Strain Induced by Varying Bottom Electrode Thicknesses on Ferroelectric Properties of Pt/Al0.7Sc0.3N/Pt Capacitors. ACS Applied Materials & Interfaces. 2026;18(30):41219-41225. doi:10.1021/acsami.6c07798

BibTeX
@article{Fang2026,
  author = {Fang, Yuan and Li, Xiaoxi and Li, Jiawei and Xu, Haiwen and Fang, Cizhe and Zeng, Xiangyu and Zhang, Jishen and Zheng, Siying and Wu, Tao and Jin, Chengji and Chen, Jiajia and Qian, Haoji and Li, Bochang and Liu, Yan and Hao, Yue and Han, Genquan},
  title = {Effect of Strain Induced by Varying Bottom Electrode Thicknesses on Ferroelectric Properties of Pt/Al0.7Sc0.3N/Pt Capacitors},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {30},
  pages = {41219--41225},
  doi = {10.1021/acsami.6c07798}
}
Kostenlos starten →