Graphene-Graphene Oxide Interfaces Enable Moisture-Tolerant Solid Lubrication
ACS Applied Materials & Interfaces · 05.08.2026 · 18 (30) · 41970-41979
DOI: 10.1021/acsami.6c07532 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 25.07.2026. Verfasst von Mingi Choi und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Pusan National University, Busan46241, South Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Korea Basic Science Institute, National Research Foundation of Korea.
Abstract (Originalsprache)
Protecting sliding surfaces from friction and wear remains a persistent engineering challenge. Graphene oxide (GO) and pristine graphene (PG), the two different carbon-based 2D materials, are attractive solid-lubricant coatings, but both are compromised by moisture. GO readily forms a protective transfer layer at the sliding contact through the reactive, adhesive chemistry of its oxygen-containing functional groups. These same groups, however, make it hydrophilic and humidity-sensitive, resulting in moisture-driven failure. PG is hydrophobic and chemically stable, yet its inert basal plane cannot sustain a persistent transfer layer, so it also loses durability under prolonged sliding in a humid environment. Here, we show that blending GO and PG, exploiting the compositional flexibility of solution-processed 2D coatings, turns this shared moisture vulnerability into a tunable design parameter. Across the full GO:PG composition range, the blended coatings sustain stable, low-friction sliding at humid sliding conditions, where both parent materials fail. In all cases, the improvement comes from keeping the carbonaceous transfer layer intact. GO and PG achieve this through complementary roles. In GO-rich blends, PG mitigates the moisture-induced failure of the GO-driven transfer layer against moisture, while in PG-rich films, GO enables the transfer-layer formation that PG alone cannot achieve. Representative GO-rich and PG-rich blends outperform their parent materials by one to two orders of magnitudes under the same humid conditions. The moisture sensitivity of graphene-derived coatings is therefore not a fixed material property but a compositionally tunable outcome, offering a practical route to moisture-tolerant solid lubrication.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Pusan National University, Busan46241, South Korea.
- Center for Nanoscale Materials, Argonne National Laboratory, Lemont, Illinois60439, United States.
- Hybrid Innovative Manufacturing Engineering Center, Pusan National University, Busan46241, South Korea.
- George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia30332, United States.
ORCID-Profile: Anirudha V Sumant, Andrei G Fedorov, Songkil Kim
Förderung
- Korea Basic Science Institute
- National Research Foundation of Korea
Zitieren
APA
Choi, M., Sumant, A. V., Kim, W. S., Lee, S., Bahn, C. B., Fedorov, A. G., & Kim, S. (2026). Graphene-Graphene Oxide Interfaces Enable Moisture-Tolerant Solid Lubrication. ACS Applied Materials & Interfaces, 18(30), 41970-41979. https://doi.org/10.1021/acsami.6c07532
Vancouver
Choi M, Sumant AV, Kim WS, Lee S, Bahn CB, Fedorov AG, et al. Graphene-Graphene Oxide Interfaces Enable Moisture-Tolerant Solid Lubrication. ACS Applied Materials & Interfaces. 2026;18(30):41970-41979. doi:10.1021/acsami.6c07532
BibTeX
@article{Choi2026,
author = {Choi, Mingi and Sumant, Anirudha V and Kim, Won-Seok and Lee, Seongyun and Bahn, Chi Bum and Fedorov, Andrei G and Kim, Songkil},
title = {Graphene-Graphene Oxide Interfaces Enable Moisture-Tolerant Solid Lubrication},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {30},
pages = {41970--41979},
doi = {10.1021/acsami.6c07532}
}
EUVIMED