EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Squeezing Gas Diffusion Electrodes in Zero-Gap CO 2 Electrolyzers─Enough Is Enough

Viktor Józó, Soma B Halasi, Dániel Sebők, Ákos Kukovecz iD, Csaba Janáky iD, Balázs Endrődi iD

ACS Applied Materials & Interfaces · 22.07.2026 · 18 (28) · 38768-38773

DOI: 10.1021/acsami.6c07060 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 08.07.2026. Verfasst von Viktor Józó und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physical Chemistry and Materials Science, University of Szeged, Rerrich Square 1, H-6720 Szeged, Hungary. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, Magyar Tudom?nyos Akad?mia, Nemzeti Kutat?si Fejleszt?si ?s Innov?ci?s Hivatal.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent scientific advancements indicate that the electrochemical reduction of carbon dioxide to carbon monoxide (CO2RR) is approaching industrial viability. Beyond scientific achievements, technology scale-up requires a full understanding of how certain cell components are to be used for long-term optimal performance and of what other challenges are posed by the larger sizes. Here, we investigated in detail how varying the compression ratio of the cathode gas diffusion electrode affects the electrochemical performance, using three fundamentally different carbon-based cathode supports. Electrochemical impedance spectroscopy and microtomography measurements are presented to explain the observed changes in the electrolysis performance, while the cathodes were gradually compressed to below 40% of their original thickness. The optimal compression range depends on the properties of the gas diffusion layer. Notably, a more than 100 μm wide optimal compression range is found for the thick ELAT1400W gas diffusion layer (i.e., a compression to 60-85% of its original thickness), which is further confirmed in 100-h-long experiments.

Schlagwörter

Stichwörter der Autor:innen

CCUCO productionGDEcarbon dioxideelectrolyzer engineering

Autor:innen und Institutionen

  • Department of Physical Chemistry and Materials Science, University of Szeged, Rerrich Square 1, H-6720 Szeged, Hungary.
  • Centre of Excellence for Interdisciplinary Research, Development and Innovation, University of Szeged, Rerrich Béla tér 1, H-6720 Szeged, Hungary.
  • Department of Applied and Environmental Chemistry, University of Szeged, Rerrich Béla tér 1, H-6720 Szeged, Hungary.
  • MTA-SZTE Lendület "Momentum" Applied Electrochemistry Research Group, University of Szeged, Rerrich Square 1, H-6720 Szeged, Hungary.

ORCID-Profile: Ákos Kukovecz, Csaba Janáky, Balázs Endrődi

Förderung

  • European Commission
  • Magyar Tudom?nyos Akad?mia
  • Nemzeti Kutat?si Fejleszt?si ?s Innov?ci?s Hivatal

Zitieren

APA

Józó, V., Halasi, S. B., Sebők, D., Kukovecz, Á., Janáky, C., & Endrődi, B. (2026). Squeezing Gas Diffusion Electrodes in Zero-Gap CO 2 Electrolyzers─Enough Is Enough. ACS Applied Materials & Interfaces, 18(28), 38768-38773. https://doi.org/10.1021/acsami.6c07060

Vancouver

Józó V, Halasi SB, Sebők D, Kukovecz Á, Janáky C, Endrődi B. Squeezing Gas Diffusion Electrodes in Zero-Gap CO 2 Electrolyzers─Enough Is Enough. ACS Applied Materials & Interfaces. 2026;18(28):38768-38773. doi:10.1021/acsami.6c07060

BibTeX
@article{Jz2026,
  author = {Józó, Viktor and Halasi, Soma B and Sebők, Dániel and Kukovecz, Ákos and Janáky, Csaba and Endrődi, Balázs},
  title = {Squeezing Gas Diffusion Electrodes in Zero-Gap CO 2 Electrolyzers─Enough Is Enough},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {28},
  pages = {38768--38773},
  doi = {10.1021/acsami.6c07060}
}
Kostenlos starten →