EUVIMEDEUVIMED entdecken
Crossref

Synergistic Co-Passivation via Ultrasmall Molecules for Efficient and Stable Perovskite Solar Cells

Rui Wu, Jinliang Zhao, Ji Jiang, Xiaoqing Chen, Yiming Shi, Wenkang Liu, Xuhao Wang, Jinxiang Deng, Xingwang Zhang iD, Junhua Meng iD

ACS Applied Materials & Interfaces · 01.07.2026 · 18 (25) · 36299-36307

DOI: 10.1021/acsami.6c06698 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 22.06.2026. Verfasst von Rui Wu und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Physics and Optoelectronic Engineering, Beijing University of Technology, Beijing 100124, P. R. China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Natural Science Foundation of Beijing Municipality, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Defect passivation is one feasible and effective approach to minimize the charge recombination of perovskite solar cells (PSCs). However, the efficacy of conventional defect passivation using Lewis base-functionalized molecules is limited due to weak bonding and large space steric hindrance. Herein, we propose a molecular engineering approach employing ultrasmall-sized potassium diformate and potassium phosphate to synergistically passivate defects at the SnO 2 /perovskite buried interface. It is found that the C═O and P═O groups effectively passivate interfacial traps, reducing trap density by ∼50% relative to the control sample. The co-modification also lowers the surface energy of SnO 2 layers, promoting the growth of perovskite grains with an average grain size increased from 780 to 1370 nm. Moreover, thermally diffused K + ions can inhibit ion migration in the perovskite lattice, thereby suppressing the hysteresis effect. According to these advantages, the optimized devices achieve a champion power conversion efficiency of 24.42% (vs 22.64% for the pristine SnO 2 -based counterpart). The unencapsulated co-passivated PSCs retain 92% of their initial efficiency after 2100 h under ambient conditions, substantially outperforming the control devices (74% retention).

Schlagwörter

Stichwörter der Autor:innen

buried interfaceco-modificationdefect passivationperovskite solar cellsultrasmall molecules

Autor:innen und Institutionen

  • School of Physics and Optoelectronic Engineering, Beijing University of Technology, Beijing 100124, P. R. China.
  • State Key Laboratory of Semiconductor Physics and Chip Technologies, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, P. R. China.
  • College of Information Science and Technology, Key Laboratory Optoelectronics Technology Ministry of Education, Beijing University of Technology, Beijing 100124, P. R. China.

ORCID-Profile: Xingwang Zhang, Junhua Meng

Förderung

  • Natural Science Foundation of Beijing Municipality
  • National Natural Science Foundation of China

Zitieren

APA

Wu, R., Zhao, J., Jiang, J., Chen, X., Shi, Y., Liu, W., Wang, X., Deng, J., Zhang, X., & Meng, J. (2026). Synergistic Co-Passivation via Ultrasmall Molecules for Efficient and Stable Perovskite Solar Cells. ACS Applied Materials & Interfaces, 18(25), 36299-36307. https://doi.org/10.1021/acsami.6c06698

Vancouver

Wu R, Zhao J, Jiang J, Chen X, Shi Y, Liu W, et al. Synergistic Co-Passivation via Ultrasmall Molecules for Efficient and Stable Perovskite Solar Cells. ACS Applied Materials & Interfaces. 2026;18(25):36299-36307. doi:10.1021/acsami.6c06698

BibTeX
@article{Wu2026,
  author = {Wu, Rui and Zhao, Jinliang and Jiang, Ji and Chen, Xiaoqing and Shi, Yiming and Liu, Wenkang and Wang, Xuhao and Deng, Jinxiang and Zhang, Xingwang and Meng, Junhua},
  title = {Synergistic Co-Passivation via Ultrasmall Molecules for Efficient and Stable Perovskite Solar Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {25},
  pages = {36299--36307},
  doi = {10.1021/acsami.6c06698}
}
Kostenlos starten →