EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Cathode Catalyst Layer Composition on Hydrogen Crossover and Performance in Anion Exchange Membrane Water Electrolysis

Alexander Kohushölter iD, Mitja Kostelec iD, Frederik Brendel iD, Macarena Paola Pizarro Montalva, Luis Hagner, Lukas Metzler, Severin Vierrath iD, Andreas Münchinger iD, Carolin Klose iD, Susanne Koch iD

ACS Applied Materials & Interfaces · 12.08.2026 · 18 (31) · 43265-43276

DOI: 10.1021/acsami.6c06592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 31.07.2026. Verfasst von Alexander Kohushölter und 9 weiteren Autor:innen. Beteiligte Einrichtung: Electrochemical Energy Systems, IMTEK - Department of Microsystems Engineering, University Freiburg, Georges-Koehler-Allee 103, 79110Freiburg, German…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Research, Technology and Space of Germany.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A major challenge in AEM electrolysis is the undesired hydrogen permeation from the cathode to the anode—the so-called hydrogen crossover. Although this process has been thoroughly examined in proton exchange membrane (PEM) systems, the effect of the cathode catalyst layer composition on H2 crossover has not yet been systematically investigated in AEM systems. In this study, gas diffusion electrodes with cathode catalyst layer variations in platinum loading (0.3 vs 0.8 mgPt cm–2), the Pt content in Pt/C (20 vs 50 wt % Pt), and ionomer content (5–24 wt % PiperION) were tested to assess their effects. Varying the Pt/C content and loading in the cathode catalyst layer while keeping the ionomer content constant revealed a linear increase of the H2 crossover at 3 A cm–2 with increasing platinum loading density (Pt loading divided by the catalyst layer volume). Additionally, a 24 wt % PiperION ionomer binder provided the lowest HFR, Tafel slope, and H2 crossover, along with improved long-term stability. Increasing the PiperION ionomer content consistently reduces H2 crossover despite a decrease in void volume and porosity, which is attributed to the increased hydrophobicity of the cathode catalyst layer. Overall, the results indicate that a more hydrophobic cathode catalyst layer effectively suppresses the H2 crossover in AEM water electrolysis. Finally, the combination of 20 wt % Pt with 0.3 mgPt/cm2 and a high ionomer binder content (24 wt %) resulted in the lowest H2 crossover, demonstrating that cathode catalyst layer composition is a key lever for decreasing H2 crossover.

Schlagwörter

Stichwörter der Autor:innen

AEM water electrolysisPt loadingPt/C electrocatalystcathode catalyst layerhydrogen crossoverhydrophobicityionomer content

Autor:innen und Institutionen

  • Electrochemical Energy Systems, IMTEK - Department of Microsystems Engineering, University Freiburg, Georges-Koehler-Allee 103, 79110Freiburg, Germany.
  • Hahn-Schickard , Georges-Koehler-Allee 103, 79110Freiburg, Germany.
  • Department of Materials Chemistry, National Institute of Chemistry, Hajdrihova ulica 19, 1001Ljubljana, Slovenia.
  • University of Nova Gorica, Vipavska 13, SI-5000Nova Gorica, Slovenia.
  • FIT - Freiburg Center for Interactive Materials and Bioinspired Technologies, University Freiburg, Georges-Koehler-Allee 105, 79110Freiburg, Germany.

ORCID-Profile: Alexander Kohushölter, Mitja Kostelec, Frederik Brendel, Severin Vierrath, Andreas Münchinger, Carolin Klose, Susanne Koch

Förderung

  • Federal Ministry of Research, Technology and Space of Germany

Zitieren

APA

Kohushölter, A., Kostelec, M., Brendel, F., Pizarro Montalva, M. P., Hagner, L., Metzler, L., Vierrath, S., Münchinger, A., Klose, C., & Koch, S. (2026). The Effect of Cathode Catalyst Layer Composition on Hydrogen Crossover and Performance in Anion Exchange Membrane Water Electrolysis. ACS Applied Materials & Interfaces, 18(31), 43265-43276. https://doi.org/10.1021/acsami.6c06592

Vancouver

Kohushölter A, Kostelec M, Brendel F, Pizarro Montalva MP, Hagner L, Metzler L, et al. The Effect of Cathode Catalyst Layer Composition on Hydrogen Crossover and Performance in Anion Exchange Membrane Water Electrolysis. ACS Applied Materials & Interfaces. 2026;18(31):43265-43276. doi:10.1021/acsami.6c06592

BibTeX
@article{Kohushlter2026,
  author = {Kohushölter, Alexander and Kostelec, Mitja and Brendel, Frederik and Pizarro Montalva, Macarena Paola and Hagner, Luis and Metzler, Lukas and Vierrath, Severin and Münchinger, Andreas and Klose, Carolin and Koch, Susanne},
  title = {The Effect of Cathode Catalyst Layer Composition on Hydrogen Crossover and Performance in Anion Exchange Membrane Water Electrolysis},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {31},
  pages = {43265--43276},
  doi = {10.1021/acsami.6c06592}
}
Kostenlos starten →