Enabling 3D Printing of Space-Durable High-Performance Polymers: Low Earth Orbit Exposure
ACS Applied Materials & Interfaces · 24.06.2026 · 18 (24) · 34284-34293
DOI: 10.1021/acsami.6c06260 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 09.06.2026. Verfasst von Eitan Grossman und 6 weiteren Autor:innen. Beteiligte Einrichtung: NOGA 3D Innovations, 17 Hamelacha Street, Rosh Ha'ain 4809146, Israel. Die Arbeit nennt 30 Literaturangaben.
Abstract (Originalsprache)
The rapid expansion of the new space sector requires advanced materials capable of supporting reliable, cost-effective, and customizable space technologies. Additive manufacturing enables the fabrication of lightweight structures with complex geometries; however, conventional polymers generally degrade under the harsh space environment, including atomic oxygen (AO) exposure, ultraviolet and ionizing radiation, and large thermal fluctuations. To overcome these limitations, hybrid photopolymers based on cyanate ester (CE) and extended bismaleimide (E-BMI) are developed for digital light processing (DLP) 3D printing. Incorporation of UV-curable polyhedral oligomeric silsesquioxane (POSS) enables the in situ formation of a protective SiO 2 passivation layer during AO exposure, improving durability in low-Earth orbit (LEO). Printed specimens were exposed aboard the International Space Station for 145 days as part of the MISSE-17 mission. Samples containing POSS exhibited up to 78% lower AO-induced erosion compared with POSS-free controls. Surface analysis confirmed the formation of SiO 2 -rich protective layers. Printing orientation was found to influence AO reactivity and surface degradation, highlighting the importance of geometry-dependent optimization. Mechanical and thermomechanical properties remained stable after flight exposure, indicating strong resistance to the LEO environment. These results demonstrated the suitability of CE/E-BMI–POSS hybrid materials for durable, high-resolution DLP-printed components intended for long-term operation in LEO.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- NOGA 3D Innovations, 17 Hamelacha Street, Rosh Ha'ain 4809146, Israel.
- Space Environment Department, Soreq NRC, Yavne 81800, Israel.
- Japan Aerospace Exploration Agency (JAXA), Tsukuba, Ibaraki 305-8505, Japan.
- Ann and H. J. Smead Department of Aerospace Engineering Sciences, University of Colorado at Boulder, Boulder, Colorado 80303-0429, United States.
ORCID-Profile: Eitan Grossman, Yuval Vidavsky, Irina Gouzman, Aki Goto, Timothy K Minton
Zitieren
APA
Grossman, E., Vidavsky, Y., Atar, N., Attias, R., Gouzman, I., Goto, A., & Minton, T. K. (2026). Enabling 3D Printing of Space-Durable High-Performance Polymers: Low Earth Orbit Exposure. ACS Applied Materials & Interfaces, 18(24), 34284-34293. https://doi.org/10.1021/acsami.6c06260
Vancouver
Grossman E, Vidavsky Y, Atar N, Attias R, Gouzman I, Goto A, et al. Enabling 3D Printing of Space-Durable High-Performance Polymers: Low Earth Orbit Exposure. ACS Applied Materials & Interfaces. 2026;18(24):34284-34293. doi:10.1021/acsami.6c06260
BibTeX
@article{Grossman2026,
author = {Grossman, Eitan and Vidavsky, Yuval and Atar, Nurit and Attias, Ran and Gouzman, Irina and Goto, Aki and Minton, Timothy K},
title = {Enabling 3D Printing of Space-Durable High-Performance Polymers: Low Earth Orbit Exposure},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {24},
pages = {34284--34293},
doi = {10.1021/acsami.6c06260}
}
EUVIMED