EUVIMEDEUVIMED entdecken
Crossref

Clean, Ice-Assisted Transfer of Flexible Transparent Copper Mesh Films for Electrothermal Heating and Terahertz Shielding

Yuyuan Yang, Xuebin Liu, Junhua Huang, Jiyong Feng, Zhenxi Dai, Zibo Chen, Xuchun Gui iD

ACS Applied Materials & Interfaces · 29.04.2026 · 18 (16) · 23880-23889

DOI: 10.1021/acsami.6c04731 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 20.04.2026. Verfasst von Yuyuan Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Optoelectronic Materials and Technologies, School of Electronics and Information Technology, Sun Yat-sen University, Guangzho…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible transparent conductive films (TCFs) are essential components for emerging flexible electronics. Among various candidates, metal mesh films offer an effective structural route to balance transparency and conductivity. However, metal mesh films often suffer from structural damage, interfacial residues, and poor compatibility with different flexible substrates during a traditional transfer process. Here, we reported an ice-assisted transfer strategy using temporary ice layers as transfer media, achieving efficient transfer of copper (Cu) mesh with clean, low damage, and substrate compatibility. The transferred Cu mesh film achieves a transmittance of 82.0% at 550 nm, and a sheet resistance of 144 mΩ/□ on TPU substrates, showing a remarkable figure of merit (FoM) of 12 524. The Cu mesh film maintained similar performance on various substrates, including hard glass, flexible polymers, skin, etc. Based on the transferred Cu mesh film, flexible transparent heaters are fabricated. The heater exhibited a high saturated temperature at a low heating voltage (>200 °C at 1.0 V), high stability (>300 min), and fast heating rate (>10 °C/s). The transparent Cu mesh film also demonstrated an average electromagnetic interference shielding effectiveness (EMI SE) of 19.0 dB in the 0.2-1.6 THz. By multilayer stacking, the resulting film showed an average EMI SE of 46.4 dB. These results indicate that the ice-assisted transfer strategy ensures the integrity of the metal mesh while retaining its superior optoelectronic characteristics and functional adaptability, providing an efficient and clean method for preparing TCFs.

Schlagwörter

Stichwörter der Autor:innen

Cu metal meshelectromagnetic interference shieldingelectrothermal heatingtransfertransparent conductive film

Autor:innen und Institutionen

  • State Key Laboratory of Optoelectronic Materials and Technologies, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China.

ORCID-Profile: Xuchun Gui

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yang, Y., Liu, X., Huang, J., Feng, J., Dai, Z., Chen, Z., & Gui, X. (2026). Clean, Ice-Assisted Transfer of Flexible Transparent Copper Mesh Films for Electrothermal Heating and Terahertz Shielding. ACS Applied Materials & Interfaces, 18(16), 23880-23889. https://doi.org/10.1021/acsami.6c04731

Vancouver

Yang Y, Liu X, Huang J, Feng J, Dai Z, Chen Z, et al. Clean, Ice-Assisted Transfer of Flexible Transparent Copper Mesh Films for Electrothermal Heating and Terahertz Shielding. ACS Applied Materials & Interfaces. 2026;18(16):23880-23889. doi:10.1021/acsami.6c04731

BibTeX
@article{Yang2026,
  author = {Yang, Yuyuan and Liu, Xuebin and Huang, Junhua and Feng, Jiyong and Dai, Zhenxi and Chen, Zibo and Gui, Xuchun},
  title = {Clean, Ice-Assisted Transfer of Flexible Transparent Copper Mesh Films for Electrothermal Heating and Terahertz Shielding},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {16},
  pages = {23880--23889},
  doi = {10.1021/acsami.6c04731}
}
Kostenlos starten →