High-Temperature Transparent Polymer Heater Based on n-Doped Poly(benzodifurandione)
ACS Applied Materials & Interfaces · 17.06.2026 · 18 (23) · 32953-32966
DOI: 10.1021/acsami.6c03624 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 04.05.2026. Verfasst von Joseph A Romo und 10 weiteren Autor:innen. Beteiligte Einrichtung: James Tarpo Jr. and Margaret Tarpo Department of Chemistry, Purdue University, West Lafayette, Indiana47907, United States. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: Office of Naval Research.
Abstract (Originalsprache)
Here we report high-performance all-polymer transparent heaters based on the air-stable n-doped polymer poly(benzodifurandione) (n-PBDF). Using a scalable ethanol-based ink and a single-step, post-treatment-free spray-coating process, the resulting films combine low sheet resistance (Rs ≈ 60 Ω sq.–1), high visible light transmittance (VLT > 80%), and low optical haze (<0.30%). The heaters reach steady-state temperatures above 180 °C at low DC voltages (<24 V) with rapid heating rates (>2.5 °C s–1). Measurements of the in-plane and cross-plane thermal conductivities reveal a pronounced thermal anisotropy (κx,y/κz ≈ (35 to 37)), with a high in-plane conductivity of ≈3.4 W m–1 K–1 that promotes uniform heating. A thermal model accounting for the Temperature Coefficient of Resistance (TCR) is applied to extract key heater parameters, revealing rapid, predictable thermal response times (t90% ≈ (90 to 150) s). The n-PBDF heaters retain >85% of their initial performance after 7 days of continuous operation and withstand 60 000 bending cycles (10 mm radius), demonstrating both robust operational stability and mechanical durability. Finally, we demonstrate practical utility by rapid deicing of surface frost on glass-substrate heaters cooled on dry ice (−78.5 °C), and by integrating heaters fabricated on flexible PET substrates into ski goggles and motorcycle visors to enable rapid, low-voltage defogging.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- James Tarpo Jr. and Margaret Tarpo Department of Chemistry, Purdue University, West Lafayette, Indiana47907, United States.
- Birck Nanotechnology Center and School of Mechanical Engineering, Purdue University, West Lafayette, Indiana47907, United States.
- Jonathan Amy Facility for Chemical Instrumentation, Purdue University, West Lafayette, Indiana47907, United States.
- Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland20899, United States.
ORCID-Profile: Joseph A Romo, Won-June Lee, Liyan You, Lucas Q Flagg, Daniel Sunday, Chad R Snyder, Dean M DeLongchamp, Amy M Marconnet, Jianguo Mei
Förderung
- Office of Naval Research
Zitieren
APA
Romo, J. A., Lee, W. J., Gaitonde, A., You, L., Cerjan, B., Flagg, L. Q., Sunday, D., Snyder, C. R., DeLongchamp, D. M., Marconnet, A. M., & Mei, J. (2026). High-Temperature Transparent Polymer Heater Based on n-Doped Poly(benzodifurandione). ACS Applied Materials & Interfaces, 18(23), 32953-32966. https://doi.org/10.1021/acsami.6c03624
Vancouver
Romo JA, Lee WJ, Gaitonde A, You L, Cerjan B, Flagg LQ, et al. High-Temperature Transparent Polymer Heater Based on n-Doped Poly(benzodifurandione). ACS Applied Materials & Interfaces. 2026;18(23):32953-32966. doi:10.1021/acsami.6c03624
BibTeX
@article{Romo2026,
author = {Romo, Joseph A and Lee, Won-June and Gaitonde, Aalok and You, Liyan and Cerjan, Benjamin and Flagg, Lucas Q and Sunday, Daniel and Snyder, Chad R and DeLongchamp, Dean M and Marconnet, Amy M and Mei, Jianguo},
title = {High-Temperature Transparent Polymer Heater Based on n-Doped Poly(benzodifurandione)},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {23},
pages = {32953--32966},
doi = {10.1021/acsami.6c03624}
}
EUVIMED