EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Toward Sustainable Lithium Recovery: A Universal Hydrothermal Approach for Lithium Extraction

Zexin Wang, Jiahui Hou, Zifei Meng, Jinzhao Fu, Zeyi Yao iD, Zhenzhen Yang iD, Yan Wang iD

ACS Applied Materials & Interfaces · 22.04.2026 · 18 (15) · 22057-22070

DOI: 10.1021/acsami.6c02211 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.04.2026. Verfasst von Zexin Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Materials Engineering, Worcester Polytechnic Institute, 100 Institute Road, Worcester, Massachusetts 01609, United State…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid growth of lithium-ion battery (LIB) deployment presents critical challenges in sustainable end-of-life management and raw material recovery. Conventional pyrometallurgical and hydrometallurgical methods suffer from high energy demand, lithium loss, and complex wastewater treatment. This study established a universal, highly efficient, and sustainable hydrothermal route for lithium extraction and material recovery from various spent lithium-ion battery cathodes using 1,2,4,5-benzenetetracarboxylic acid (BTCA). The optimized process achieved over 99% lithium leaching efficiency for lithium iron phosphate (LFP) and LiNixMnyCo1-x-yO2 (NMC), with transition metal coleaching below 1%. It was also broadly applicable to lithium manganese oxide, lithium cobalt oxide, and black mass, achieving 98.5%, 98.95%, and 94.06% leaching efficiencies, respectively. The extracted lithium was directly converted into battery-grade lithium sources, while transition metals were recovered as oxides. Unreacted BTCA was efficiently regenerated and reused without degradation. Electrochemical evaluation confirmed that cathode materials synthesized with recovered lithium exhibit comparable performance to commercial products. Compared to conventional hydrometallurgy, the BTCA-based process increased revenue by over 40% and reduced greenhouse gas emissions by up to 39%. This closed-loop, chemistry-agnostic strategy offered a scalable and economically viable solution for industrial LIB recycling, enabling resource circularity and reducing dependency on primary critical materials.

Schlagwörter

Stichwörter der Autor:innen

battery-grade producthigh selectivityhydrothermal reactionlithium-ion batteries recyclingultrahigh efficiencyuniversal feedstock

Autor:innen und Institutionen

  • Department of Mechanical and Materials Engineering, Worcester Polytechnic Institute, 100 Institute Road, Worcester, Massachusetts 01609, United States.
  • Chemical Sciences & Engineering Division, Argonne National Laboratory, 9700 S Cass Ave, Lemont, Illinois 60439, United States.

ORCID-Profile: Zeyi Yao, Zhenzhen Yang, Yan Wang

Zitieren

APA

Wang, Z., Hou, J., Meng, Z., Fu, J., Yao, Z., Yang, Z., & Wang, Y. (2026). Toward Sustainable Lithium Recovery: A Universal Hydrothermal Approach for Lithium Extraction. ACS Applied Materials & Interfaces, 18(15), 22057-22070. https://doi.org/10.1021/acsami.6c02211

Vancouver

Wang Z, Hou J, Meng Z, Fu J, Yao Z, Yang Z, et al. Toward Sustainable Lithium Recovery: A Universal Hydrothermal Approach for Lithium Extraction. ACS Applied Materials & Interfaces. 2026;18(15):22057-22070. doi:10.1021/acsami.6c02211

BibTeX
@article{Wang2026,
  author = {Wang, Zexin and Hou, Jiahui and Meng, Zifei and Fu, Jinzhao and Yao, Zeyi and Yang, Zhenzhen and Wang, Yan},
  title = {Toward Sustainable Lithium Recovery: A Universal Hydrothermal Approach for Lithium Extraction},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {15},
  pages = {22057--22070},
  doi = {10.1021/acsami.6c02211}
}
Kostenlos starten →