EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Geometry-Induced Capillary Rise and Directional Flow in Porous Lattice Structures

Yunsan Choi, Josue Yaedalm Son, Hyejeong Kim iD

ACS Applied Materials & Interfaces · 15.04.2026 · 18 (14) · 21212-21224

DOI: 10.1021/acsami.6c00662 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 06.04.2026. Verfasst von Yunsan Choi und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Korea University, Seoul 02841, Republic of Korea. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precise control of capillary-driven liquid transport in porous media underpins numerous interfacial processes in microfluidics, water harvesting, and biomimetic systems. Conventional random porous materials exhibit structural heterogeneity that yields stochastic and irreproducible flow behavior. It was hypothesized that three-dimensional ordered lattices with well-defined geometry, particularly body-centered-cubic (BCC) lattices, could realize deterministic and tunable capillary rise by regulating structural parameters such as the strut diameter, aspect ratio, and unit-cell configuration. To validate this hypothesis, BCC lattices with systematically varied structural parameters were produced by using an additive-manufacturing approach, and capillary rise behavior was examined across geometries. Visualization techniques, including optical- and X-ray-based methods, were used to elucidate the progression of liquid fronts and meniscus evolution. A force-balance model was developed to predict the maximum rise height by incorporating adhesive and gravitational effects within the lattice. Geometric periodicity and asymmetry were found to strongly govern the interfacial transport behavior. Larger strut diameters and denser lattice arrays enhance the capillary height by increasing Laplace pressure and extended liquid-solid contact perimeter. Multicell configurations promoted cooperative meniscus coalescence and triangular wetting fronts, yielding predictable and anisotropic fluid propagation. Moreover, gradient-configured lattices with asymmetric strut distributions yield passive yet directional liquid transport, driven by spatial variations in hydraulic resistance. These findings extend classical capillary theory to ordered three-dimensional porous networks, unveiling geometry as a powerful design parameter for programmable, energy-efficient fluidic, and interfacial systems.

Schlagwörter

Stichwörter der Autor:innen

3D printingbody-centered cubiccapillary risedirectional fluid transportporous structure

Autor:innen und Institutionen

  • School of Mechanical Engineering, Korea University, Seoul 02841, Republic of Korea.
  • Max Planck Institute for Dynamics and Self-Organization, Am Faßberg 17, 37077 Göttingen, Germany.

ORCID-Profile: Hyejeong Kim

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Choi, Y., Son, J. Y., & Kim, H. (2026). Geometry-Induced Capillary Rise and Directional Flow in Porous Lattice Structures. ACS Applied Materials & Interfaces, 18(14), 21212-21224. https://doi.org/10.1021/acsami.6c00662

Vancouver

Choi Y, Son JY, Kim H. Geometry-Induced Capillary Rise and Directional Flow in Porous Lattice Structures. ACS Applied Materials & Interfaces. 2026;18(14):21212-21224. doi:10.1021/acsami.6c00662

BibTeX
@article{Choi2026,
  author = {Choi, Yunsan and Son, Josue Yaedalm and Kim, Hyejeong},
  title = {Geometry-Induced Capillary Rise and Directional Flow in Porous Lattice Structures},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {21212--21224},
  doi = {10.1021/acsami.6c00662}
}
Kostenlos starten →