In Situ Atomic Arrangement and Defect Engineering of Li-Rich Cathodes for Interface Stabilization
ACS Applied Materials & Interfaces · 22.04.2026 · 18 (15) · 21913-21923
DOI: 10.1021/acsami.5c25069 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 09.04.2026. Verfasst von Yueying Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Sichuan University, Chengdu 610065, P. R. China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 65 Literaturangaben. Gefördert von: Science and Technology Department of Sichuan Province, National Natural Science Foundation of China, National Science and Technology Major Project.
Abstract (Originalsprache)
Coming research trends will move toward high-energy-density Li-rich manganese layered (LMR) cathodes (>900 Wh kg-1). Nevertheless, their practical implementation is severely impeded by irreversible lattice oxygen release, progressive structural deterioration, pronounced capacity, and voltage decay. A critical unresolved issue arises from the absence of an effective atomic-scale design principle capable of stabilizing the interfacial structure and suppressing the layer-to-rock salt transformation, an instability pathway that is further aggravated in high-Ni LMR compositions. In this work, we establish an in situ atomic-level regulation strategy through La3+/W6+ codoping, which induces the formation of an interface-disordered phase while preserving the integrity of the layered framework. This strategy provides a direct resolution to this long-standing structural challenge by enabling controlled oxygen-vacancy generation and localized cation rearrangement at the near-surface region, thereby effectively suppressing detrimental phase transitions during electrochemical cycling and simultaneously enhancing Li+ transport kinetics. The introduction of robust La-O and W-O bonds further reinforces the interfacial oxygen framework and markedly improves thermal stability. As a consequence, the modified cathode demonstrates substantially enhanced electrochemical durability. Compared with the original sample, the capacity retention rate of LW-3 is 80.25%, which is significantly better than that of LMR (66.26%). Moreover, the results substantiate that high-Ni LMR compositions possess an intrinsic propensity toward layered-to-rock-salt transformation, which profoundly compromises structural and electrochemical stability. This work strengthens the structural integrity and mechanical resilience of LMR cathodes and offers a responsible strategy toward realizing high-energy, long-life Li-rich layered oxides suitable for next-generation energy storage technologies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemical Engineering, Sichuan University, Chengdu 610065, P. R. China.
ORCID-Profile: Xiaodong Guo
Förderung
- Science and Technology Department of Sichuan Province
- National Natural Science Foundation of China
- National Science and Technology Major Project
Zitieren
APA
Liu, Y., Zhang, M., Zheng, S., Yan, B., Shi, Y., Xu, J., Qiu, L., & Guo, X. (2026). In Situ Atomic Arrangement and Defect Engineering of Li-Rich Cathodes for Interface Stabilization. ACS Applied Materials & Interfaces, 18(15), 21913-21923. https://doi.org/10.1021/acsami.5c25069
Vancouver
Liu Y, Zhang M, Zheng S, Yan B, Shi Y, Xu J, et al. In Situ Atomic Arrangement and Defect Engineering of Li-Rich Cathodes for Interface Stabilization. ACS Applied Materials & Interfaces. 2026;18(15):21913-21923. doi:10.1021/acsami.5c25069
BibTeX
@article{Liu2026,
author = {Liu, Yueying and Zhang, Mengke and Zheng, Shuli and Yan, Binbin and Shi, Yu and Xu, Jiahui and Qiu, Lang and Guo, Xiaodong},
title = {In Situ Atomic Arrangement and Defect Engineering of Li-Rich Cathodes for Interface Stabilization},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {15},
pages = {21913--21923},
doi = {10.1021/acsami.5c25069}
}
EUVIMED