Ionomer Structure Engineering for Optimal Triple-Phase Boundaries in Anion Exchange Membrane Water Electrolysers
ACS Applied Materials & Interfaces · 08.04.2026 · 18 (13) · 19773-19786
DOI: 10.1021/acsami.5c24607 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 24.03.2026. Verfasst von Junfeng Zhang und 12 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Engines, School of Mechanical Engineering, Tianjin University, Tianjin 300072, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: Natural Science Foundation of Tianjin Municipality, National Key Research and Development Program of China.
Abstract (Originalsprache)
In anion exchange membrane water electrolyzers (AEMWEs), the construction of efficient triple-phase boundaries (TPBs) within the catalyst layer (CL) is often hindered by catalyst agglomeration and the spatial distribution of ionomers, particularly for metal oxide-based catalysts that are inherently prone to aggregation. Achieving an ideal TPB requires a well-interpenetrated network of catalyst aggregates, ionomer, and pore space. However, current understanding of how the chemical structure of anion exchange ionomers (AEIs) governs catalyst agglomerate dispersion and ionomer penetration into these aggregates remains limited. Here, we systematically evaluate the influence of three representative commercial AEIs (PiperION A5, Sustainion XA-9, and Fumion FAA-3) on CL morphology and systematically investigate AEMWE performance. The results demonstrate that ionomers with flexible hydrophilic structures are more favorable for penetrating catalyst aggregates to form internal binding networks, therefore minimizing film-like coverage, enhancing active-site exposure, reducing charge-transfer resistance, and ultimately promoting effective TPB formation. Moreover, reducing the ionomer content further optimizes TPB construction within the CL, leading to a substantial improvement in AEMWE performance. Building on these findings, prioritizing essential alkaline stability, aryl piperidinium ionomers are engineered with a flexible meta-terphenyl to adjust rigidity, while triphenylbenzene branching is incorporated to suppress swelling. This synergistic modification greatly improves the overall ionomer performance, reaching an operating voltage of 1.60 V@1 A cm-2. These findings offer valuable insights into the relationship between AEI structure and CL morphology, providing practical design principles for next-generation anodic AEIs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Engines, School of Mechanical Engineering, Tianjin University, Tianjin 300072, China.
- Huaneng Clean Energy Research Institute, Beijing 102209, China.
ORCID-Profile: Junfeng Zhang, Yan Yin
Förderung
- Natural Science Foundation of Tianjin Municipality
- National Key Research and Development Program of China
Zitieren
APA
Zhang, J., Cao, X., Lu, Q., Xiao, Y., Yue, R., Guan, S., Guo, W., Yan, X., Wang, J., Wang, X., Ren, Z., Wang, L., & Yin, Y. (2026). Ionomer Structure Engineering for Optimal Triple-Phase Boundaries in Anion Exchange Membrane Water Electrolysers. ACS Applied Materials & Interfaces, 18(13), 19773-19786. https://doi.org/10.1021/acsami.5c24607
Vancouver
Zhang J, Cao X, Lu Q, Xiao Y, Yue R, Guan S, et al. Ionomer Structure Engineering for Optimal Triple-Phase Boundaries in Anion Exchange Membrane Water Electrolysers. ACS Applied Materials & Interfaces. 2026;18(13):19773-19786. doi:10.1021/acsami.5c24607
BibTeX
@article{Zhang2026,
author = {Zhang, Junfeng and Cao, Xinyi and Lu, Qichen and Xiao, Yang and Yue, Runfei and Guan, Shan and Guo, Weiqi and Yan, Xupeng and Wang, Jinyi and Wang, Xiaolong and Ren, Zhibo and Wang, Lianqin and Yin, Yan},
title = {Ionomer Structure Engineering for Optimal Triple-Phase Boundaries in Anion Exchange Membrane Water Electrolysers},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {13},
pages = {19773--19786},
doi = {10.1021/acsami.5c24607}
}
EUVIMED