Pore-Induced Inhomogeneous Interfaces Influencing Dielectric Properties in Low- k Polymer Aerogels
ACS Applied Materials & Interfaces · 28.01.2026 · 18 (3) · 4900-4909
DOI: 10.1021/acsami.5c22514 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.01.2026. Verfasst von Xuanye Tian und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: China National Space Administration.
Abstract (Originalsprache)
Pore structure plays a pivotal role in regulating the dielectric properties of materials, emerging as a critical strategy for designing microwave communication materials and electronic devices. However, quantifying the pore structure–dielectric property relationship in porous media remains inadequately explored. Herein, a series of low- k polymer phenolic aerogels (PAs) with precisely regulated porosities are employed as a model system to explicitly reveal the dielectric regulation mechanism of pore structure. As porosity decreases from 86 to 22%, the dielectric constant of PAs exhibits a nonlinear rapid increase from 1.3 to 2.5, while dielectric loss (tanδ) rises proportionally from 0.008 to 0.032. It is disclosed that the pore-induced inhomogeneous interfaces, which exhibit a continuous transition from a dense core to a loose shell, could contribute to a lower value of dielectric constant than that of the matrix phase. Accordingly, a three-phase dielectric constant prediction formula that integrates the interfacial phase, bulk polymer, and air is developed. The dielectric constant and the thickness of the interfacial phase are determined according to finite-element simulations. In addition, we identify the interfacial layer-induced interfacial polarization is the dominant loss mechanism in the porous aerogels, and the dielectric loss shows linear scaling with specific surface area and an inverse power-law dependence on particle size. With a particle size below 60 nm, the interface’s influence on dielectric properties grows more pronounced. These findings provided a systematic theoretical basis for the inverse design of dielectric properties in porous low- k porous media.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China.
- Structural Materials Research Department, Suzhou Laboratory, Suzhou 215000, China.
- Key Laboratory of Specially Functional Polymeric Materials and Related Technology (Ministry of Education), East China University of Science and Technology, Shanghai 200237, China.
ORCID-Profile: Donghui Long
Förderung
- China National Space Administration
Zitieren
APA
Tian, X., Tian, H., Wang, X., Luo, Y., Yang, P., Su, Z., Niu, B., & Long, D. (2026). Pore-Induced Inhomogeneous Interfaces Influencing Dielectric Properties in Low- k Polymer Aerogels. ACS Applied Materials & Interfaces, 18(3), 4900-4909. https://doi.org/10.1021/acsami.5c22514
Vancouver
Tian X, Tian H, Wang X, Luo Y, Yang P, Su Z, et al. Pore-Induced Inhomogeneous Interfaces Influencing Dielectric Properties in Low- k Polymer Aerogels. ACS Applied Materials & Interfaces. 2026;18(3):4900-4909. doi:10.1021/acsami.5c22514
BibTeX
@article{Tian2026,
author = {Tian, Xuanye and Tian, Hao and Wang, Xueyang and Luo, Yi and Yang, Peiqi and Su, Zhe and Niu, Bo and Long, Donghui},
title = {Pore-Induced Inhomogeneous Interfaces Influencing Dielectric Properties in Low- k Polymer Aerogels},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {3},
pages = {4900--4909},
doi = {10.1021/acsami.5c22514}
}
EUVIMED