Multimodal Double-Helix Fiber Sensors for Distinguishable Pressure and Strain Detection in Wearable Sensory Applications
ACS Applied Materials & Interfaces · 12.11.2025 · 17 (45) · 62410-62419
DOI: 10.1021/acsami.5c18966 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 31.10.2025. Verfasst von Dashdendev Tsogbayar und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Chemical Engineering, Hanyang University, Ansan 15588, Republic of Korea. Hauptthemen laut MEDLINE: Wearable Electronic Devices. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 52 Literaturangaben.
Abstract (Originalsprache)
Fiber sensors with an engineered architecture offer a compelling platform for next-generation wearable electronics, owing to their inherent mechanical adaptability and compatibility with textile integration. In this study, a multimodal fiber sensor with a one-dimensional double-helix architecture is introduced, enabling the distinct detection of pressure and strain stimuli within a single device. Strain sensing is realized via piezoresistive changes in a helical conductive fiber, while pressure is detected through piezocapacitive responses between two twisted fiber electrodes separated by a dielectric layer. This structural configuration ensures effective decoupling of signals, yielding a reliable dual-mode operation without cross-interference. The strain-sensing component demonstrates a gauge factor of 0.03 ± 0.001%-1, high linearity (0.996-0.999), negligible hysteresis, rapid response (∼300 ms) and recovery (∼350 ms) times over a broad strain range (0-300%), and stable performance over 2500 cycles. The pressure sensor exhibits a gauge factor of 0.001 ± 2 × 10-5 kPa-1, excellent linearity (0.992), fast response (∼150 ms), and mechanical durability of over 2500 cycles. Practical demonstrations─including joint motion, respiration, tactile force, and airflow detection─validate the sensor's multimodal functionality. By integrating high fidelity, minimal signal interference, and robust structural performance, the proposed double-helix fiber sensor presents a versatile and scalable solution for wearable multimodal sensing applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Chemical Engineering, Hanyang University, Ansan 15588, Republic of Korea.
- BK21 FOUR ERICA-ACE Center, Hanyang University, Ansan 15588, Republic of Korea.
- College of Electronic Information and Optical Engineering, Nankai University, Tianjin 300350, China.
ORCID-Profile: Wentao Xu, Hwa Sung Lee
Zitieren
APA
Tsogbayar, D., Seo, J., Hwang, T., Kim, Y., Park, J., Oh, S., Xu, W., & Lee, H. S. (2025). Multimodal Double-Helix Fiber Sensors for Distinguishable Pressure and Strain Detection in Wearable Sensory Applications. ACS Applied Materials & Interfaces, 17(45), 62410-62419. https://doi.org/10.1021/acsami.5c18966
Vancouver
Tsogbayar D, Seo J, Hwang T, Kim Y, Park J, Oh S, et al. Multimodal Double-Helix Fiber Sensors for Distinguishable Pressure and Strain Detection in Wearable Sensory Applications. ACS Applied Materials & Interfaces. 2025;17(45):62410-62419. doi:10.1021/acsami.5c18966
BibTeX
@article{Tsogbayar2025,
author = {Tsogbayar, Dashdendev and Seo, Jungyoon and Hwang, Taehoon and Kim, Yumin and Park, Jisu and Oh, Suhyun and Xu, Wentao and Lee, Hwa Sung},
title = {Multimodal Double-Helix Fiber Sensors for Distinguishable Pressure and Strain Detection in Wearable Sensory Applications},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {45},
pages = {62410--62419},
doi = {10.1021/acsami.5c18966}
}
EUVIMED