Interface Engineering with Co-Self-Assembled Monolayers for Improved Charge Extraction and Morphology in Organic Photovoltaics
ACS Applied Materials & Interfaces · 19.11.2025 · 17 (46) · 63996-64005
DOI: 10.1021/acsami.5c17695 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.11.2025. Verfasst von Bing-Huang Jiang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering and Center for Plasma and Thin Film Technologies, Ming Chi University of Technology, New Taipei City 24301, Taiwa…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Science and Technology Council.
Abstract (Originalsprache)
Carbazole-based self-assembled monolayers (SAMs), such as the widely used [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz), have significantly improved the performance of conventional organic photovoltaics (OPVs) by serving as efficient hole-selective layers (HSLs). However, the intrinsic limitations of 2PACz have hindered further enhancements in device performance. Although the molecular modification of 2PACz is a common strategy to overcome these constraints, it often introduces challenges. In this study, we present a coself-assembled monolayer (co-SAM) approach that blends 2PACz with 4PDACB to address the drawbacks associated with single-component SAMs. This co-SAM strategy effectively balances electrode work function tuning, interfacial quality improvement, and active layer blend morphology optimization, thereby enabling enhanced overall performance in OPVs. By optimizing PM6:Y6-based OPVs using the co-SAM strategy, we achieved an outstanding power conversion efficiency (PCE) of 17.55%, significantly exceeding the PCEs of devices with single-layer 2PACz (17.08%) and 4PDACB (16.13%). The effectiveness of this approach was further demonstrated in ternary OPVs, where co-SAMs enabled a maximum PCE of 18.69%. These results underscore the critical role of surface engineering in controlling film morphology and provide valuable insights for advancing OPV performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Engineering and Center for Plasma and Thin Film Technologies, Ming Chi University of Technology, New Taipei City 24301, Taiwan.
- Department of Molecular Science and Engineering Institute of Organic and Polymeric Materials, National Taipei University of Technology, Taipei 106344, Taiwan.
- Department of Electrical and Computer Engineering, International Islamic University Malaysia, Kuala Lumpur 50728, Malaysia.
- Somapex Biotech. Co. Ltd, Kaohsiung 80681, Taiwan.
- Center for Sustainability and Energy Technologies, Chang Gung University, Taoyuan City 33302, Taiwan.
ORCID-Profile: Yu-Wei Su, Zhong-En Shi, Yang-Yen Yu, Chih-Ping Chen
Förderung
- National Science and Technology Council
Zitieren
APA
Jiang, B. H., Huang, Z. R., Su, Y. W., Shi, Z. E., Hasbullah, N. F., Hsu, Y. C., Yu, Y. Y., & Chen, C. P. (2025). Interface Engineering with Co-Self-Assembled Monolayers for Improved Charge Extraction and Morphology in Organic Photovoltaics. ACS Applied Materials & Interfaces, 17(46), 63996-64005. https://doi.org/10.1021/acsami.5c17695
Vancouver
Jiang BH, Huang ZR, Su YW, Shi ZE, Hasbullah NF, Hsu YC, et al. Interface Engineering with Co-Self-Assembled Monolayers for Improved Charge Extraction and Morphology in Organic Photovoltaics. ACS Applied Materials & Interfaces. 2025;17(46):63996-64005. doi:10.1021/acsami.5c17695
BibTeX
@article{Jiang2025,
author = {Jiang, Bing-Huang and Huang, Zih-Ruei and Su, Yu-Wei and Shi, Zhong-En and Hasbullah, Nurul Fadzlin and Hsu, Yu-Chih and Yu, Yang-Yen and Chen, Chih-Ping},
title = {Interface Engineering with Co-Self-Assembled Monolayers for Improved Charge Extraction and Morphology in Organic Photovoltaics},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {46},
pages = {63996--64005},
doi = {10.1021/acsami.5c17695}
}
EUVIMED