EUVIMEDEUVIMED entdecken
Crossref

Scalable-Manufacturing Triboelectric Fabric Sensor for Pressure Distribution Mapping during Human Body Activities

Qingyun Tao iD, Cong Zheng, Ruihua Wang, Jiyong Hu iD, Jinhua Jiang iD

ACS Applied Materials & Interfaces · 01.10.2025 · 17 (39) · 55107-55120

DOI: 10.1021/acsami.5c15705 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 17.09.2025. Verfasst von Qingyun Tao und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Textile Science & Technology, Ministry of Education, Donghua University, Shanghai 201620, China. Hauptthemen laut MEDLINE: Textiles, Wearable Electronic Devices. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The scalable manufacturing of all-textile triboelectric pressure sensors capable of high-sensitivity and crosstalk-free pressure distribution mapping remains challenging. This study develops a scalable triboelectric fabric pressure mapping sensor with high sensitivity and free crosstalk by directly interlacing polytetrafluoroethylene/stainless steel (PTFE-SS) braided yarns (negative materials) and the polyamide 66/stainless steel (PA66-SS) braided yarn (positive materials) into the plain derivative weave fabric on an industrialized loom, enabling scalable production. Crucially, the results demonstrate that reducing warp/weft densities significantly boosts electrical output. We further establish the first equivalent circuit model (FO-ECM) for the triboelectric woven fabric pressure mapping sensor, achieving a 0.978 fitting coefficient to predict output under varying weave densities, thereby enabling digital parametric design. Significantly, parameter optimization of warp/weft densities identified an optimal configuration that enhances electrical output, achieving high sensitivity (2.942 V·kPa-1, 0-1 kPa). Furthermore, the triboelectric woven fabric pressure sensor was extended to develop an interference-free triboelectric fabric sensor array (TFSA) through structural spacing design, eliminating crosstalk by elucidating the dominant role of fringe electric fields and quantitatively modeling their spatial decay, thereby enabling high-spatial-resolution pressure mapping. Finally, the distributed pressure mapping of typical human body activities demonstrated the practical performance of the developed triboelectric fabric sensor. This facile integrated approach─from scalable fabrication to interference-free arrays─advances real-time wearable self-powered health monitoring.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TextilesWearable Electronic DevicesHumansPressurePolytetrafluoroethyleneStainless SteelMonitoring, Physiologic

Stichwörter der Autor:innen

equivalent circuit model (FO-ECM)scalable productiontriboelectric fabric pressure sensorstriboelectric fabric sensing arrayswearable health monitoring

Substanzen

PolytetrafluoroethyleneStainless Steel

Autor:innen und Institutionen

  • Key Laboratory of Textile Science & Technology, Ministry of Education, Donghua University, Shanghai 201620, China.
  • Key Laboratory of High-Performance Fibers & Products, Ministry of Education, Donghua University, Shanghai 201620, China.
  • College of Textiles, Donghua University, Shanghai 201620, China.

ORCID-Profile: Qingyun Tao, Jiyong Hu, Jinhua Jiang

Förderung

  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Tao, Q., Zheng, C., Wang, R., Hu, J., & Jiang, J. (2025). Scalable-Manufacturing Triboelectric Fabric Sensor for Pressure Distribution Mapping during Human Body Activities. ACS Applied Materials & Interfaces, 17(39), 55107-55120. https://doi.org/10.1021/acsami.5c15705

Vancouver

Tao Q, Zheng C, Wang R, Hu J, Jiang J. Scalable-Manufacturing Triboelectric Fabric Sensor for Pressure Distribution Mapping during Human Body Activities. ACS Applied Materials & Interfaces. 2025;17(39):55107-55120. doi:10.1021/acsami.5c15705

BibTeX
@article{Tao2025,
  author = {Tao, Qingyun and Zheng, Cong and Wang, Ruihua and Hu, Jiyong and Jiang, Jinhua},
  title = {Scalable-Manufacturing Triboelectric Fabric Sensor for Pressure Distribution Mapping during Human Body Activities},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {39},
  pages = {55107--55120},
  doi = {10.1021/acsami.5c15705}
}
Kostenlos starten →