Bioinspired MOF-Based PVA/TA Hybrid Membrane with Superior Mechanical Durability and Antifouling Properties for Emulsion Separation
ACS Applied Materials & Interfaces · 26.11.2025 · 17 (47) · 64376-64391
DOI: 10.1021/acsami.5c15487 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 14.11.2025. Verfasst von Aamal Rehman und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, Islamabad 44000, Pakistan. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 50 Literaturangaben.
Abstract (Originalsprache)
Separation of emulsified oily wastewater poses a significant challenge due to ongoing problems such as severe membrane fouling and low separation efficiency. Metal-organic frameworks (MOFs) are widely regarded as viable candidates for separation applications due to their high surface area and tunable properties. However, forming a stable and uniform MOF-based separation layer on membrane supports remains a significant challenge. The complex synthesis procedures and limited mechanical flexibility of conventional MOF membranes have hindered their adoption for oil-in-water separation. In this research work, MIL-101(Fe) was prepared and successfully used to construct a barrier layer on membrane surfaces via a simple vacuum-assisted filtration method. Notably, tannic acid (TA) exhibited excellent compatibility with MIL-101(Fe), acting as a natural binder that reinforced the MOF layer. This interaction yielded a highly stable and flexible separation layer, addressing the key limitations of traditional MOF membranes in treating complex oily wastewater. The MIL-101(Fe) based membranes have shown excellent stability against tape peeling, continuous water flushing, bending, and sonication tests. Furthermore, the PTM membrane exhibited superior antifouling properties, with UWOCA of 162.6°, indicating strong oil repellency. Its hydrophilic surface facilitated rapid water transport, leading to a separation efficiency exceeding 98% when treating oil-in-water emulsions with a concentration of 1000 ppm. The membrane performance is not compromised under several cycles of reusability, and an unprecedented 99.1% flux recovery was observed. This work has demonstrated that, with the appropriate engineering, a stable and effective MIL-101(Fe) coating can be developed on the surface of the support membrane, offering outstanding separation efficiency, durability, and abrasion resistance. This makes it an effective solution for addressing complex oily wastewater streams.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, Islamabad 44000, Pakistan.
- College of Science and Engineering, Hamad Bin Khalifa University, Qatar Foundation, Doha, P.O.B 34111, Qatar.
- Interdisciplinary Research Centre for Membranes and Water Security, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia.
ORCID-Profile: Aamal Rehman, Manzar Sohail, Ahmed Abdala, Nadeem Baig
Zitieren
APA
Rehman, A., Sohail, M., Abbasi, G. R., Wahab, M. A., Abdala, A., & Baig, N. (2025). Bioinspired MOF-Based PVA/TA Hybrid Membrane with Superior Mechanical Durability and Antifouling Properties for Emulsion Separation. ACS Applied Materials & Interfaces, 17(47), 64376-64391. https://doi.org/10.1021/acsami.5c15487
Vancouver
Rehman A, Sohail M, Abbasi GR, Wahab MA, Abdala A, Baig N. Bioinspired MOF-Based PVA/TA Hybrid Membrane with Superior Mechanical Durability and Antifouling Properties for Emulsion Separation. ACS Applied Materials & Interfaces. 2025;17(47):64376-64391. doi:10.1021/acsami.5c15487
BibTeX
@article{Rehman2025,
author = {Rehman, Aamal and Sohail, Manzar and Abbasi, Ghazala Razaq and Wahab, Md A and Abdala, Ahmed and Baig, Nadeem},
title = {Bioinspired MOF-Based PVA/TA Hybrid Membrane with Superior Mechanical Durability and Antifouling Properties for Emulsion Separation},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {47},
pages = {64376--64391},
doi = {10.1021/acsami.5c15487}
}
EUVIMED