Al-Foam-Based Solar Interfacial Evaporator Prepared by Picosecond Laser Combined with Fire Burning Used for High-Efficiency Solar Desalination, Water Purification, and Salt Resistance
ACS Applied Materials & Interfaces · 24.09.2025 · 17 (38) · 53648-53658
DOI: 10.1021/acsami.5c14572 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.09.2025. Verfasst von Zhiliang Tang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Major Scientific and Technological Innovation Project of Shandong Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Solar-driven interfacial evaporation technology represents an innovative and high-efficiency desalination approach. This technology plays a crucial role in relieving the shortage of worldwide freshwater resources. However, the interfacial evaporator still faces great challenges in terms of high efficiency and ensuring long-term evaporation stability, among other aspects. Here, a novel and simple interfacial evaporator based on foamed aluminum (Al) has been designed. This evaporator is made using a treatment process that combines picosecond laser treatment with fire treatment (LTF). Due to the porous channels, inherent hydrophilicity of the solar interfacial evaporator, and its laser-treated and fire-carbonized surface, it has an efficient light absorption rate (>99.9%) and a high efficiency (93.5%). In the indoor experiment, a water evaporation rate of up to 5.55 kg m-2 h-1 is achieved under 1 sun irradiation (1 kW/m2). During the evaporation of high-concentration brine with a mass fraction of 15%, the solar-driven water evaporation rate can still be maintained at 5.15 kg m-2 h-1. In outdoor environments, a freshwater collection amount of 6.81 kg m-2 per day can be obtained. These works provide new ideas for the preparation of solar evaporators that are highly efficient, capable of long-term stable operation, and also promote the practical application of sustainable water purification technologies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China.
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan 250061, China.
- School of Mechanical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China.
ORCID-Profile: Dongkai Chu
Förderung
- National Key Research and Development Program of China
- Major Scientific and Technological Innovation Project of Shandong Province
- National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
Zitieren
APA
Tang, Z., Hu, S., Chu, D., Yang, F., Qu, S., & Yao, P. (2025). Al-Foam-Based Solar Interfacial Evaporator Prepared by Picosecond Laser Combined with Fire Burning Used for High-Efficiency Solar Desalination, Water Purification, and Salt Resistance. ACS Applied Materials & Interfaces, 17(38), 53648-53658. https://doi.org/10.1021/acsami.5c14572
Vancouver
Tang Z, Hu S, Chu D, Yang F, Qu S, Yao P. Al-Foam-Based Solar Interfacial Evaporator Prepared by Picosecond Laser Combined with Fire Burning Used for High-Efficiency Solar Desalination, Water Purification, and Salt Resistance. ACS Applied Materials & Interfaces. 2025;17(38):53648-53658. doi:10.1021/acsami.5c14572
BibTeX
@article{Tang2025,
author = {Tang, Zhiliang and Hu, Shuangshuang and Chu, Dongkai and Yang, Fangyu and Qu, Shuoshuo and Yao, Peng},
title = {Al-Foam-Based Solar Interfacial Evaporator Prepared by Picosecond Laser Combined with Fire Burning Used for High-Efficiency Solar Desalination, Water Purification, and Salt Resistance},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {38},
pages = {53648--53658},
doi = {10.1021/acsami.5c14572}
}
EUVIMED