EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Durable Icephobic and Superhydrophobic Silicon Nanowire Surfaces

Seyed Mehran Mirmohammadi iD, Miika Heikkilä, Laura Fieber, Mohammad Awashra, Sara Hamed, Suprit Bhusare, Gaurav Mohanty, Robin H A Ras iD, Ville Jokinen iD, Sami Franssila

ACS Applied Materials & Interfaces · 26.11.2025 · 17 (47) · 65242-65252

DOI: 10.1021/acsami.5c13616 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 17.11.2025. Verfasst von Seyed Mehran Mirmohammadi und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Materials Science, Micronova Nanofabrication Centre, Aalto University, Espoo 02150, Finland. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Teknologiateollisuuden 100-Vuotisjuhlas??ti?, Research Council of Finland, Jane ja Aatos Erkon S??ti?.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Superhydrophobic surfaces hold great promise for various engineering applications. However, their fragility and limited durability in real-world scenarios pose significant challenges. Here, a durable superhydrophobic and icephobic surface is fabricated using the metal-assisted chemical etching method to create silicon nanowires within inverted pyramidal microstructures. Mechanical robustness is introduced by applying a hard coating to the structure through titanium film deposition, followed by annealing in a nitrogen atmosphere, which forms titanium silicide and titanium nitride. The hard-coated surfaces can endure up to 60 g of sand abrasion or 20 icing-shearing cycles while still retaining their superhydrophobic properties (advancing and receding contact angles of approximately 150°) and icephobic properties (ice adhesion strength of approximately 10 kPa).

Schlagwörter

Stichwörter der Autor:innen

air plastronhard coatingimpact testindentationmetal-assisted chemical etchingsuperhydrophobicity

Autor:innen und Institutionen

  • Department of Chemistry and Materials Science, Micronova Nanofabrication Centre, Aalto University, Espoo 02150, Finland.
  • Department of Applied Physics, Aalto University, Espoo 02150, Finland.
  • Materials Science and Environmental Engineering, Faculty of Engineering and Natural Sciences, Tampere University, Tampere 33014, Finland.
  • Centre of Excellence in Life-Inspired Hybrid Materials (LIBER), Aalto University, Espoo 02150, Finland.

ORCID-Profile: Seyed Mehran Mirmohammadi, Robin H A Ras, Ville Jokinen

Förderung

  • Teknologiateollisuuden 100-Vuotisjuhlas??ti?
  • Research Council of Finland
  • Jane ja Aatos Erkon S??ti?
  • Business Finland

Zitieren

APA

Mirmohammadi, S. M., Heikkilä, M., Fieber, L., Awashra, M., Hamed, S., Bhusare, S., Mohanty, G., Ras, R. H. A., Jokinen, V., & Franssila, S. (2025). Durable Icephobic and Superhydrophobic Silicon Nanowire Surfaces. ACS Applied Materials & Interfaces, 17(47), 65242-65252. https://doi.org/10.1021/acsami.5c13616

Vancouver

Mirmohammadi SM, Heikkilä M, Fieber L, Awashra M, Hamed S, Bhusare S, et al. Durable Icephobic and Superhydrophobic Silicon Nanowire Surfaces. ACS Applied Materials & Interfaces. 2025;17(47):65242-65252. doi:10.1021/acsami.5c13616

BibTeX
@article{Mirmohammadi2025,
  author = {Mirmohammadi, Seyed Mehran and Heikkilä, Miika and Fieber, Laura and Awashra, Mohammad and Hamed, Sara and Bhusare, Suprit and Mohanty, Gaurav and Ras, Robin H A and Jokinen, Ville and Franssila, Sami},
  title = {Durable Icephobic and Superhydrophobic Silicon Nanowire Surfaces},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {47},
  pages = {65242--65252},
  doi = {10.1021/acsami.5c13616}
}
Kostenlos starten →