EUVIMEDEUVIMED entdecken
Crossref

Oxide-Filled Porous Transport Layer in Ordered Membrane Electrode Assembly for Water Electrolysis

Shiqi Zhao, Yiyang Liu, Yuzhuo Jiang, Qinglin Wen, Wentao Huang, Wei Li, Ali Hammad, Bin Tian iD, Xiaochun Zhou iD

ACS Applied Materials & Interfaces · 12.11.2025 · 17 (45) · 61968-61978

DOI: 10.1021/acsami.5c12279 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 28.10.2025. Verfasst von Shiqi Zhao und 8 weiteren Autor:innen. Beteiligte Einrichtung: Division of Advanced Nanomaterials, Suzhou Institute of Nano-tech and Nano-bionics, Chinese Academy of Sciences (CAS), Suzhou 215123, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province, National Natural Science Foundation of China, Alliance of International Science Organizations.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The poor interfacial contact between the low-iridium-loaded catalyst layer and the porous transport layer (PTL) remains a major bottleneck for limiting the performance of proton exchange membrane water electrolysis (PEMWE). In this work, a microporous layer (MPL) composed of CeO2 nanoparticles and microcrystalline cellulose (MCC) was developed to address this challenge. By rationally tuning the particle sizes of CeO2 and MCC, the resulting infill structure exhibited significantly improved interfacial compatibility and a tailored pore size distribution. Consequently, the ordered membrane electrode assembly (MEA) incorporating this optimized MPL demonstrated an electrochemically active surface area (ECSA) 2.8 times higher than that of a conventional MEA without an MPL filler. Furthermore, the fabricated ordered MEA achieved a high current density of 4.58 A cm-2 at 2.0 V with an ultralow Ir catalyst loading of 48.4 μg cm-2 while giving excellent activity retention for over 200 h at 0.5 A cm-2 current density. This study offers a promising strategy for designing high-performance MEA with ultralow precious metal loading.

Schlagwörter

Stichwörter der Autor:innen

Nafion arrayPEM water splittingordered MEAoxide-Filledporous transport layer

Autor:innen und Institutionen

  • Division of Advanced Nanomaterials, Suzhou Institute of Nano-tech and Nano-bionics, Chinese Academy of Sciences (CAS), Suzhou 215123, China.
  • School of Nano Technology and Nano Bionics, University of Science and Technology of China, Hefei 230026, China.
  • Key Laboratory of Precision and Intelligent Chemistry, University of Science and Technology of China, Hefei, Anhui 230026, China.

ORCID-Profile: Bin Tian, Xiaochun Zhou

Förderung

  • Basic and Applied Basic Research Foundation of Guangdong Province
  • National Natural Science Foundation of China
  • Alliance of International Science Organizations
  • Gusu Innovation and Entrepreneurship Leading Talent Plan
  • Sinano talents plan

Zitieren

APA

Zhao, S., Liu, Y., Jiang, Y., Wen, Q., Huang, W., Li, W., Hammad, A., Tian, B., & Zhou, X. (2025). Oxide-Filled Porous Transport Layer in Ordered Membrane Electrode Assembly for Water Electrolysis. ACS Applied Materials & Interfaces, 17(45), 61968-61978. https://doi.org/10.1021/acsami.5c12279

Vancouver

Zhao S, Liu Y, Jiang Y, Wen Q, Huang W, Li W, et al. Oxide-Filled Porous Transport Layer in Ordered Membrane Electrode Assembly for Water Electrolysis. ACS Applied Materials & Interfaces. 2025;17(45):61968-61978. doi:10.1021/acsami.5c12279

BibTeX
@article{Zhao2025,
  author = {Zhao, Shiqi and Liu, Yiyang and Jiang, Yuzhuo and Wen, Qinglin and Huang, Wentao and Li, Wei and Hammad, Ali and Tian, Bin and Zhou, Xiaochun},
  title = {Oxide-Filled Porous Transport Layer in Ordered Membrane Electrode Assembly for Water Electrolysis},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {45},
  pages = {61968--61978},
  doi = {10.1021/acsami.5c12279}
}
Kostenlos starten →