Size-Selective Nanoporous Atomically Thin Graphene Separators for Lithium–Sulfur Batteries
ACS Applied Materials & Interfaces · 01.10.2025 · 17 (39) · 55554-55563
DOI: 10.1021/acsami.5c11148 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 04.09.2025. Verfasst von Daniel A Gribble und 3 weiteren Autor:innen. Beteiligte Einrichtung: Davidson School of Chemical Engineering, Purdue University, West Lafayette, Indiana 47907, United States. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy, National Science Foundation.
Abstract (Originalsprache)
Lithium-sulfur batteries (LSBs) are extensively researched for their high energy densities but are hindered by the lithium polysulfide (LiPS) shuttling effect, which results in poor cyclability. A popular mitigation strategy is separator modification, where a LiPS trapping material is slurry-coated onto a conventional microporous polypropylene (PP) separator. This additional mass and volume unfortunately compromise the overall energy density of the LSB. This study aims to take a separator modification approach that avoids this issue. Nanoporous atomically thin membranes (NATMs) made of graphene are gaining attention for their scalable synthesis, tunable pore size, and negligible pore length. Herein, we apply a well-characterized graphene NATM for reasons similar to those of a size-selective interlayer in LSBs. The tailored pore size of ∼0.7-1.0 nm and atomic thinness facilitate the passage of Li+ (solvated ionic diameters ∼0.54-1.26 nm) and blockage of larger LiPS (solvated ionic diameters ∼0.81-1.69 nm) without adding significant impedances or mass. The sulfur confinement is confirmed through scanning electron microscopy and energy-dispersive X-ray spectroscopy elemental analysis of the Li anode. An LSB with a NATM@PP separator shows virtually no capacity loss over 150 cycles, demonstrating efficacy of size-selective molecular sieving using NATMs in LSBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Davidson School of Chemical Engineering, Purdue University, West Lafayette, Indiana 47907, United States.
- Department of Chemical and Biomolecular Engineering, Vanderbilt University, Nashville, Tennessee 37212, United States.
- Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, Florida 32611, United States.
ORCID-Profile: Daniel A Gribble, Peifu Cheng, Vilas G Pol, Piran R Kidambi
Förderung
- U.S. Department of Energy
- National Science Foundation
Zitieren
APA
Gribble, D. A., Cheng, P., Pol, V. G., & Kidambi, P. R. (2025). Size-Selective Nanoporous Atomically Thin Graphene Separators for Lithium–Sulfur Batteries. ACS Applied Materials & Interfaces, 17(39), 55554-55563. https://doi.org/10.1021/acsami.5c11148
Vancouver
Gribble DA, Cheng P, Pol VG, Kidambi PR. Size-Selective Nanoporous Atomically Thin Graphene Separators for Lithium–Sulfur Batteries. ACS Applied Materials & Interfaces. 2025;17(39):55554-55563. doi:10.1021/acsami.5c11148
BibTeX
@article{Gribble2025,
author = {Gribble, Daniel A and Cheng, Peifu and Pol, Vilas G and Kidambi, Piran R},
title = {Size-Selective Nanoporous Atomically Thin Graphene Separators for Lithium–Sulfur Batteries},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {39},
pages = {55554--55563},
doi = {10.1021/acsami.5c11148}
}
EUVIMED