Effects of Etching and Delamination on Biocompatibility of Ti-Based MXenes
ACS Applied Materials & Interfaces · 27.08.2025 · 17 (34) · 47919-47937
DOI: 10.1021/acsami.5c08807 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 18.08.2025. Verfasst von Kateryna Diedkova und 19 weiteren Autor:innen. Beteiligte Einrichtung: Biomedical Research Centre, Sumy State University, Sumy 40007, Ukraine. Hauptthemen laut MEDLINE: Titanium, Biocompatible Materials. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, Narodowe Centrum Nauki, H2020 Marie Sklodowska-Curie Actions.
Abstract (Originalsprache)
MXenes, a class of two-dimensional transition metal carbides and nitrides, have emerged as promising candidates for biomedical applications due to their electrical conductivity, photothermal response, and rich surface chemistry. However, their biocompatibility is highly sensitive to synthesis conditions, particularly etching and delamination strategies. In this study, we systematically investigated the influence of different synthesis routes─using acidic (concentrated or diluted HF/HCl) etching and Li+ versus Na+ intercalation─on the surface chemistry, structural integrity, and biological behavior of Ti3C2Tx and its carbonitride analog Ti3C1.5N0.5Tx. Detailed physicochemical characterization revealed that water-assisted etching and Na+ intercalation enhanced hydroxylation and reduced fluorine terminations. Biological assays using human keratinocytes (HaCaT) demonstrated that Ti3C1.5N0.5Tx exhibited superior biocompatibility compared to Ti3C2Tx, with lower cytotoxicity, diminished ROS generation, minimal inflammatory signaling (IL-6 and IL-8 interleukins), and preserved wound healing capacity. Among Ti3C2Tx variants, the combination of diluted etchant and Na+ intercalation significantly improved biological tolerance, minimizing apoptosis and oxidative stress. These findings underscore the critical role of surface chemistry in MXene-cell interactions and offer a practical guide to engineering safer MXenes for biomedical use.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Biomedical Research Centre, Sumy State University, Sumy 40007, Ukraine.
- University of Latvia, Riga LV-1004, Latvia.
- A. J. Drexel Nanomaterials Institute, and Department of Materials Science and Engineering, Drexel University, Philadelphia, Pennsylvania 19104, United States.
- University of Novi Sad, Zorana Dindica 1, Novi Sad 21000, Serbia.
- Faculty of Chemistry, Silesian University of Technology, Strzody 9, Gliwice 44-100, Poland.
- Centre for Organic and Nanohybrid Electronics, Silesian University of Technology, Konarskiego 22B, Gliwice 44-100, Poland.
ORCID-Profile: Kateryna Diedkova, Igor Iatsunskyi, Wojciech Simka, Marks Truhins, Oksana Sulaieva, Ilya Yanko, Veronika Zahorodna, Goran Stojanovic, Yury Gogotsi, Maksym Pogorielov
Förderung
- European Commission
- Narodowe Centrum Nauki
- H2020 Marie Sklodowska-Curie Actions
- Latvijas Universitate
- Latvian Postdoctoral research project
Zitieren
APA
Diedkova, K., Roslyk, I., Kanas, N., Grine, L., Deineka, V., Blacha-Grzechnik, A., Boroduskis, M., Iatsunskyi, I., Anastaziak, B., Konieva, A., Shubin, P., Simka, W., Truhins, M., Sulaieva, O., Yanko, I., Zahorodna, V., Stojanovic, G., Gogotsi, O., Gogotsi, Y., & Pogorielov, M. (2025). Effects of Etching and Delamination on Biocompatibility of Ti-Based MXenes. ACS Applied Materials & Interfaces, 17(34), 47919-47937. https://doi.org/10.1021/acsami.5c08807
Vancouver
Diedkova K, Roslyk I, Kanas N, Grine L, Deineka V, Blacha-Grzechnik A, et al. Effects of Etching and Delamination on Biocompatibility of Ti-Based MXenes. ACS Applied Materials & Interfaces. 2025;17(34):47919-47937. doi:10.1021/acsami.5c08807
BibTeX
@article{Diedkova2025,
author = {Diedkova, Kateryna and Roslyk, Iryna and Kanas, Nikola and Grine, Lita and Deineka, Volodymyr and Blacha-Grzechnik, Agata and Boroduskis, Martins and Iatsunskyi, Igor and Anastaziak, Błażej and Konieva, Anastasia and Shubin, Pavlo and Simka, Wojciech and Truhins, Marks and Sulaieva, Oksana and Yanko, Ilya and Zahorodna, Veronika and Stojanovic, Goran and Gogotsi, Oleksiy and Gogotsi, Yury and Pogorielov, Maksym},
title = {Effects of Etching and Delamination on Biocompatibility of Ti-Based MXenes},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {34},
pages = {47919--47937},
doi = {10.1021/acsami.5c08807}
}
EUVIMED