Promising Alloys for Hydrogen Storage in the Compositional Space of (TiVNb)100– x (Cr,Mo) x High-Entropy Alloys
ACS Applied Materials & Interfaces · 23.07.2025 · 17 (29) · 41991-42003
DOI: 10.1021/acsami.5c08574 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 11.07.2025. Verfasst von Andrei Agafonov und 11 weiteren Autor:innen. Beteiligte Einrichtung: Univ. Paris-Est Creteil, CNRS, ICMPE, UMR 7182, 2 Rue Henri Dunant, Thiais 94320, France. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Engineering and Physical Sciences Research Council, Agence Nationale de la Recherche, Leverhulme Trust.
Abstract (Originalsprache)
This study reports on the search for the most promising alloys in the compositional space of (TiVNb)80Cr20–xMox (x = 5, 10, and 15) and (TiVNb)75Cr25–xMox (x = 5, 10, 15, and 20) high-entropy alloys. First, data-driven machine learning applied to these systems predicts that increasing the Mo content destabilizes the enthalpy of the hydride phases. Second, experimental and density functional theory (DFT) validations were performed. The as-prepared alloys have single-phase bcc lattices and rapidly absorb hydrogen to form fcc-type hydrides with a high capacity between 1.6 and 2.0 H/M. Despite a positive effect on the thermodynamics of the hydride phases, increasing the Mo content in these alloys has a negative effect on the maximum capacity. The cycling experiments highlight the need to balance the reversible capacity, cycle life, and crystalline stabilities of these phases. Therefore, considering all these results, the most promising alloy with trade-off properties within the targeted compositional space has been identified to be (TiVNb)75Cr5Mo20 that shows a maximum capacity of 2.6 wt % (1.8 H/M), a reasonable enthalpy of hydride formation (−38.6 kJ/mol H2), and a notable gravimetric reversible capacity of 1.42 wt % at room temperature. To identify the most promising high-entropy alloys for this application, integrated machine learning predictions followed by experimental and DFT validations proved to be an effective strategy.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Univ. Paris-Est Creteil, CNRS, ICMPE, UMR 7182, 2 Rue Henri Dunant, Thiais 94320, France.
- Sandia National Laboratories, Livermore, California 94551, United States.
- Department of Chemistry─Ångström Laboratory, Ångströmlaboratoriet, Uppsala University, Lägerhyddsvägen 1, Uppsala 751 20, Sweden.
- CNRS, Université Grenoble Alpes, Institut Néel, Grenoble 38042, France.
- Advanced Materials Research Group, Faculty of Engineering, University of Nottingham, Nottingham NG7 2RD, U.K.
ORCID-Profile: Andrei Agafonov, Matthew D Witman, Veronica Enblom, Sanliang Ling, Vitalie Stavila, Claudia Zlotea
Förderung
- Engineering and Physical Sciences Research Council
- Agence Nationale de la Recherche
- Leverhulme Trust
- Stiftelsen ?forsk
Zitieren
APA
Agafonov, A., Pineda-Romero, N., Witman, M. D., Enblom, V., Sahlberg, M., Nassif, V., Lei, L., Grant, D. M., Dornheim, M., Ling, S., Stavila, V., & Zlotea, C. (2025). Promising Alloys for Hydrogen Storage in the Compositional Space of (TiVNb)100– x (Cr,Mo) x High-Entropy Alloys. ACS Applied Materials & Interfaces, 17(29), 41991-42003. https://doi.org/10.1021/acsami.5c08574
Vancouver
Agafonov A, Pineda-Romero N, Witman MD, Enblom V, Sahlberg M, Nassif V, et al. Promising Alloys for Hydrogen Storage in the Compositional Space of (TiVNb)100– x (Cr,Mo) x High-Entropy Alloys. ACS Applied Materials & Interfaces. 2025;17(29):41991-42003. doi:10.1021/acsami.5c08574
BibTeX
@article{Agafonov2025,
author = {Agafonov, Andrei and Pineda-Romero, Nayely and Witman, Matthew D and Enblom, Veronica and Sahlberg, Martin and Nassif, Vivian and Lei, Lei and Grant, David M and Dornheim, Martin and Ling, Sanliang and Stavila, Vitalie and Zlotea, Claudia},
title = {Promising Alloys for Hydrogen Storage in the Compositional Space of (TiVNb)100– x (Cr,Mo) x High-Entropy Alloys},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {29},
pages = {41991--42003},
doi = {10.1021/acsami.5c08574}
}
EUVIMED