EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Silver Particle Distribution in a Carbon Nanocomposite Interlayer on Lithium Plating in Anode-Free All-Solid-State Batteries

Michael Metzler iD, Christopher Doerrer iD, Yige Sun iD, Guillaume Matthews iD, Enzo Liotti iD, Patrick S Grant iD

ACS Applied Materials & Interfaces · 09.07.2025 · 17 (27) · 39089-39096

DOI: 10.1021/acsami.5c06550 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 26.06.2025. Verfasst von Michael Metzler und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, U.K. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henry Royce Institute, Linacre College, University of Oxford, Faraday Institution.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid-state batteries can outperform lithium-ion batteries in energy per unit mass or volume when operating with a Li metal anode. However, Li anodes pose significant manufacturing challenges. Anode-free cells avoid these challenges by plating metallic Li at the anode on the first charge, but subsequent nonuniform cyclic stripping and plating decrease the Coulombic efficiency and encourage Li dendrites and early cell failure. We report a new spray-printed nanocomposite bilayer of silver/carbon black (Ag/CB) between anodic current collectors and a Li6PS5Cl solid electrolyte comprising an Ag-rich region at the current collector and a CB-rich region at the solid electrolyte. Compared with previous Ag/CB mixtures, this bilayer promoted more uniform Li anode plating and improved cycling. Cells with a high-Ni oxide cathode had an initial discharge capacity of >190 mAh/g and a Coulombic efficiency of >98% over 100 cycles. Improved Li plating uniformity with the structured Ag/CB interlayer was confirmed by using secondary-ion mass spectrometry (SIMS) imaging.

Schlagwörter

Stichwörter der Autor:innen

anode-freebattery structural designlayer-by-layersecondary-ion mass spectrometrysilver−carbon layersolid-state battery manufacturingspray printing

Autor:innen und Institutionen

  • Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, U.K.
  • The Faraday Institution, University of Oxford, Quad One, Becquerel Ave, Harwell Campus, Didcot OX11 0RA, U.K.
  • Department of Mechanical and Industrial Engineering, University of Toronto, University of Toronto, 5 King's College Road, Toronto, ON M5S 3G8, Canada.

ORCID-Profile: Michael Metzler, Christopher Doerrer, Yige Sun, Guillaume Matthews, Enzo Liotti, Patrick S Grant

Förderung

  • Henry Royce Institute
  • Linacre College, University of Oxford
  • Faraday Institution

Zitieren

APA

Metzler, M., Doerrer, C., Sun, Y., Matthews, G., Liotti, E., & Grant, P. S. (2025). Effect of Silver Particle Distribution in a Carbon Nanocomposite Interlayer on Lithium Plating in Anode-Free All-Solid-State Batteries. ACS Applied Materials & Interfaces, 17(27), 39089-39096. https://doi.org/10.1021/acsami.5c06550

Vancouver

Metzler M, Doerrer C, Sun Y, Matthews G, Liotti E, Grant PS. Effect of Silver Particle Distribution in a Carbon Nanocomposite Interlayer on Lithium Plating in Anode-Free All-Solid-State Batteries. ACS Applied Materials & Interfaces. 2025;17(27):39089-39096. doi:10.1021/acsami.5c06550

BibTeX
@article{Metzler2025,
  author = {Metzler, Michael and Doerrer, Christopher and Sun, Yige and Matthews, Guillaume and Liotti, Enzo and Grant, Patrick S},
  title = {Effect of Silver Particle Distribution in a Carbon Nanocomposite Interlayer on Lithium Plating in Anode-Free All-Solid-State Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {27},
  pages = {39089--39096},
  doi = {10.1021/acsami.5c06550}
}
Kostenlos starten →