A Superhydrophobic Photothermal Cotton Fabric for Anti-Icing/Deicing and High-Performance Urea–Formaldehyde Foam
ACS Applied Materials & Interfaces · 11.06.2025 · 17 (23) · 34759-34770
DOI: 10.1021/acsami.5c04136 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 28.05.2025. Verfasst von Yuan Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Polymer Materials Engineering of China, Polymer Research Institute of Sichuan University, Chengdu 610065, China. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: Guiding Science and Technology Plan for Social Development of Zhenjiang, National Key Laboratory of Industrial Equipment Structure Analysis Optimization and CAE Software, Zhengzhou University, Zhangjiagang County.
Abstract (Originalsprache)
Superhydrophobic photothermal coatings are promising for anti-icing and deicing, but the current challenge lies in developing a readily scalable and efficient photothermal material. Herein, a low-cost and efficient superhydrophobic photothermal cotton fabric (PDMS/PPy@fabric) was facilely fabricated by in situ growth of polypyrrole (PPy) and siloxane (PDMS) treatment. The synergistic integration of the photothermal property of PPy, transparent and robust PDMS layer with low surface energy, and hierarchical micro-/nanoscale structure endowed the fabric with exceptional durable superhydrophobicity and photothermal conversion efficiency. The fabric demonstrated anti-icing performance with an icing delay time of 2400 s. The surface equilibrium temperature was as high as 107.2 °C, and the freezing droplet melted rapidly (180 s) under one solar light and automatically taken off due to minimized surface adhesion, which avoided the refreezing and enhanced the photothermal conversion. Furthermore, PDMS/PPy@fabric was incorporated into urea-formaldehyde (UF) resin to fabricate a lightweight composite foam via an innovative photothermal foaming process, which eliminated the conventional oven curing and enhanced mechanical strength and water resistance. This study provides a perspective to develop a photothermal material for multifunctional application.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Polymer Materials Engineering of China, Polymer Research Institute of Sichuan University, Chengdu 610065, China.
- School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China.
- State Key Laboratory of Structural Analysis, Optimization and CAE Software for Industrial Equipment, Zhengzhou University, Zhengzhou 450001, China.
ORCID-Profile: Buyong Wu
Förderung
- Guiding Science and Technology Plan for Social Development of Zhenjiang
- National Key Laboratory of Industrial Equipment Structure Analysis Optimization and CAE Software, Zhengzhou University
- Zhangjiagang County
Zitieren
APA
Yang, Y., Luo, Y., Dong, B., Wu, B., & Zhou, Y. (2025). A Superhydrophobic Photothermal Cotton Fabric for Anti-Icing/Deicing and High-Performance Urea–Formaldehyde Foam. ACS Applied Materials & Interfaces, 17(23), 34759-34770. https://doi.org/10.1021/acsami.5c04136
Vancouver
Yang Y, Luo Y, Dong B, Wu B, Zhou Y. A Superhydrophobic Photothermal Cotton Fabric for Anti-Icing/Deicing and High-Performance Urea–Formaldehyde Foam. ACS Applied Materials & Interfaces. 2025;17(23):34759-34770. doi:10.1021/acsami.5c04136
BibTeX
@article{Yang2025,
author = {Yang, Yuan and Luo, Yu and Dong, Binbin and Wu, Buyong and Zhou, Yingguo},
title = {A Superhydrophobic Photothermal Cotton Fabric for Anti-Icing/Deicing and High-Performance Urea–Formaldehyde Foam},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {23},
pages = {34759--34770},
doi = {10.1021/acsami.5c04136}
}
EUVIMED