EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Scalable WS 2 -Graphene Hybrids for Ultralow NO 2 Concentration Detection

Shuja Bashir Malik iD, Fatima Ezahra Annanouch iD, Carla Bittencourt, Eduard Llobet iD

ACS Applied Materials & Interfaces · 28.05.2025 · 17 (21) · 31592-31603

DOI: 10.1021/acsami.5c03302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.05.2025. Verfasst von Shuja Bashir Malik und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, Universitat Rovira i Virgili, MINOS, Avda. Països Catalans 26, Tarragona 43007, Spain. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministerio de Ciencia, Innovaci?n y Universidades, Ag?ncia de Gesti? d'Ajuts Universitaris i de Recerca, Instituci? Catalana de Recerca i Estudis Avan?ats.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a facile approach for fabricating hybrid heterostructures of tungsten disulfide (WS2), synthesized via atmospheric pressure chemical vapor deposition (APCVD) and commercial graphene. A simple airbrushing technique, with nitrogen (N2) as the carrier gas, was employed to fabricate the sensors. The morphological and structural characterizations of the hybrid material revealed a sheet-like synthesis of edge-enriched 2D WS2 decorated with multilayer graphene nanomaterial. The gas-sensing properties of the pristine and hybrid materials were evaluated for nitrogen dioxide (NO2) at various operating temperatures. The hybrid sensor with a WS2 to graphene ratio of 3:1 demonstrated exceptional sensitivity to ultralow NO2 concentrations (10 ppb) at a remarkably low operating temperature of 100 °C, outperforming both the graphene and WS2 counterparts. Additionally, the sensor's responses to CO, H2, C6H6, and NH3 were examined to assess its selectivity. The sensor was tested under different relative humidity conditions (RH at 25 °C; 25%, 50%, and 75%). The sensor response nearly doubled at RH = 50%, highlighting its potential for practical applications in selective NO2 detection. The sensor responses eventually reached saturation at 75% RH. In addition, the manuscript provides a detailed discussion of the NO2 gas sensing mechanism.

Schlagwörter

Stichwörter der Autor:innen

2D materialsAPCVDNO2TMDsWS2gas sensorsulfurization

Autor:innen und Institutionen

  • School of Engineering, Universitat Rovira i Virgili, MINOS, Avda. Països Catalans 26, Tarragona 43007, Spain.
  • IU-RESCAT, Research Institute in Sustainability, Climatic Change and Energy Transition, Universitat Rovira i Virgili, Joanot Martorell 15, Vila-seca 43480, Spain.
  • TecnATox - Centre for Environmental, Food and Toxicological Technology, Universitat Rovira i Virgili, Avda. Països Catalans 26, Tarragona 43007, Spain.
  • Chimie des Interactions Plasma-Surface (ChIPS), Research Institute for Materials Science and Engineering, University of Mons, Mons 7000, Belgium.

ORCID-Profile: Shuja Bashir Malik, Fatima Ezahra Annanouch, Eduard Llobet

Förderung

  • Ministerio de Ciencia, Innovaci?n y Universidades
  • Ag?ncia de Gesti? d'Ajuts Universitaris i de Recerca
  • Instituci? Catalana de Recerca i Estudis Avan?ats
  • Universitat Rovira i Virgili

Zitieren

APA

Malik, S. B., Annanouch, F. E., Bittencourt, C., & Llobet, E. (2025). Scalable WS 2 -Graphene Hybrids for Ultralow NO 2 Concentration Detection. ACS Applied Materials & Interfaces, 17(21), 31592-31603. https://doi.org/10.1021/acsami.5c03302

Vancouver

Malik SB, Annanouch FE, Bittencourt C, Llobet E. Scalable WS 2 -Graphene Hybrids for Ultralow NO 2 Concentration Detection. ACS Applied Materials & Interfaces. 2025;17(21):31592-31603. doi:10.1021/acsami.5c03302

BibTeX
@article{Malik2025,
  author = {Malik, Shuja Bashir and Annanouch, Fatima Ezahra and Bittencourt, Carla and Llobet, Eduard},
  title = {Scalable WS 2 -Graphene Hybrids for Ultralow NO 2 Concentration Detection},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {21},
  pages = {31592--31603},
  doi = {10.1021/acsami.5c03302}
}
Kostenlos starten →