Silk Fibroin Surface Engineering Using Phase Separation Approaches for Enhanced Cell Adhesion and Proliferation
ACS Applied Materials & Interfaces · 2025
DOI: 10.1021/acsami.5c00874 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, 2025. Verfasst von Karolína Kocourková und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlín, Vavrečkova 5669, 760 01 Zlín, Czech Republic. Hauptthemen laut MEDLINE: Fibroins, Biocompatible Materials. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Grantov? Agentura Cesk? Republiky.
Abstract (Originalsprache)
Due to excellent mechanical properties and biocompatibility, materials based on silk fibroin are increasingly included in advanced biomedical research and applications. However, their poor supporting properties for cell adhesion and proliferation represent limiting factors of the utilization. To eliminate this deficiency, we developed a series of phase-separation approaches allowing for tunable texturing of planar and 3D printed fibroin surfaces from nano to macro levels. The formation of surface structures presented is based on a combination of good and poor solvents, whereas no potentially problematic templates or additives, diminishing biocompatibility of the resulting material, are required. A critical factor in obtaining and scaling of the textures is control over the degree of transformation of fibroin secondary structures between prevalently amorphous Silk I and semicrystalline Silk II forms before and during surface treatment. Employing a set of optimized procedures, selectively or hierarchically structured fibroin surfaces can be prepared at the nano, micro, and macro level, which are characterized by long-term stability in physiological environments, allowing enhanced adhesion and proliferation of human keratinocytes as well as skin fibroblast cultivations.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlín, Vavrečkova 5669, 760 01 Zlín, Czech Republic.
- Centre of Polymer Systems, Tomas Bata University in Zlín, Třída Tomáš Bati 5678, 760 01 Zlín, Czech Republic.
- Department of Biomaterials, Faculty of Engineering Science, University Bayreuth, Prof.-Rüdiger-Bormann. Str. 1, 95447 Bayreuth, Germany.
ORCID-Profile: Martin Humenik, Antonín Minařík
Förderung
- Grantov? Agentura Cesk? Republiky
Zitieren
APA
Kocourková, K., Kadlečková, M., Wrzecionko, E., Mikulka, F., Knechtová, E., Černá, P., Humenik, M., & Minařík, A. (2025). Silk Fibroin Surface Engineering Using Phase Separation Approaches for Enhanced Cell Adhesion and Proliferation. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.5c00874
Vancouver
Kocourková K, Kadlečková M, Wrzecionko E, Mikulka F, Knechtová E, Černá P, et al. Silk Fibroin Surface Engineering Using Phase Separation Approaches for Enhanced Cell Adhesion and Proliferation. ACS Applied Materials & Interfaces. 2025. doi:10.1021/acsami.5c00874
BibTeX
@article{Kocourkov2025,
author = {Kocourková, Karolína and Kadlečková, Markéta and Wrzecionko, Erik and Mikulka, Filip and Knechtová, Eliška and Černá, Petronela and Humenik, Martin and Minařík, Antonín},
title = {Silk Fibroin Surface Engineering Using Phase Separation Approaches for Enhanced Cell Adhesion and Proliferation},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
doi = {10.1021/acsami.5c00874}
}
EUVIMED