EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Contact Resistance Optimization in MoS 2 Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications

Yuan Fa iD, Agata Piacentini iD, Bart Macco iD, Holger Kalisch, Michael Heuken, Andrei Vescan iD, Zhenxing Wang iD, Max C Lemme iD

ACS Applied Materials & Interfaces · 23.04.2025 · 17 (16) · 24526-24534

DOI: 10.1021/acsami.4c21596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 11.03.2025. Verfasst von Yuan Fa und 7 weiteren Autor:innen. Beteiligte Einrichtung: AMO GmbH, Advanced Microelectronic Center Aachen, Otto-Blumenthal-Str. 25, 52074 Aachen, Germany. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Bundesministerium f?r Bildung und Forschung, Deutsche Forschungsgemeinschaft, Horizon 2020 Framework Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two-dimensional material (2DM)-based field-effect transistors (FETs), such as molybdenum disulfide (MoS2)-FETs, have gained significant attention for their potential for ultrashort channels, thereby extending Moore's law. However, MoS2-FETs are prone to the formation of Schottky barriers at the metal-MoS2 interface, resulting in high contact resistance (Rc) and, consequently, reduced transistor currents in the ON-state. Our study explores the modification of MoS2 to induce the formation of conductive 1T-MoS2 at the metal-MoS2 interface via reverse sputtering. MoS2-FETs exposed to optimized reverse sputtering conditions in the contact area show Rc values reduced to less than 50% of their untreated counterparts. This reduction translates into improvements in other electrical characteristics, such as higher ON-state currents. Since reverse sputtering is a standard semiconductor process that enhances the electrical performance of MoS2-FETs, it has great potential for broader application scenarios in 2DM-based microelectronic devices and circuits.

Schlagwörter

Stichwörter der Autor:innen

MOCVDMoS2−FETsargon ion treatmentcontact resistancereverse sputteringstructural modification

Autor:innen und Institutionen

  • AMO GmbH, Advanced Microelectronic Center Aachen, Otto-Blumenthal-Str. 25, 52074 Aachen, Germany.
  • Chair of Electronic Devices, RWTH Aachen University, Otto-Blumenthal-Str. 25, 52074 Aachen, Germany.
  • Department of Applied Physics and Science Education, Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands.
  • Compound Semiconductor Technology, RWTH Aachen University, 52074 Aachen, Germany.
  • AIXTRON SE, 52134 Herzogenrath, Germany.

ORCID-Profile: Yuan Fa, Agata Piacentini, Bart Macco, Andrei Vescan, Zhenxing Wang, Max C Lemme

Förderung

  • Bundesministerium f?r Bildung und Forschung
  • Deutsche Forschungsgemeinschaft
  • Horizon 2020 Framework Programme

Zitieren

APA

Fa, Y., Piacentini, A., Macco, B., Kalisch, H., Heuken, M., Vescan, A., Wang, Z., & Lemme, M. C. (2025). Contact Resistance Optimization in MoS 2 Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications. ACS Applied Materials & Interfaces, 17(16), 24526-24534. https://doi.org/10.1021/acsami.4c21596

Vancouver

Fa Y, Piacentini A, Macco B, Kalisch H, Heuken M, Vescan A, et al. Contact Resistance Optimization in MoS 2 Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications. ACS Applied Materials & Interfaces. 2025;17(16):24526-24534. doi:10.1021/acsami.4c21596

BibTeX
@article{Fa2025,
  author = {Fa, Yuan and Piacentini, Agata and Macco, Bart and Kalisch, Holger and Heuken, Michael and Vescan, Andrei and Wang, Zhenxing and Lemme, Max C},
  title = {Contact Resistance Optimization in MoS 2 Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {16},
  pages = {24526--24534},
  doi = {10.1021/acsami.4c21596}
}
Kostenlos starten →