Vat Photopolymerization Additive Manufacturing of WC-Co Hardmetals Enabled by In Situ Polymerization-Induced Microencapsulation
ACS Applied Materials & Interfaces · 29.01.2025 · 17 (4) · 7190-7200
DOI: 10.1021/acsami.4c20608 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 15.01.2025. Verfasst von Zhanhe Liu und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: State Key Laboratory of Powder Metallurgy, National Natural Science Foundation of China, Chinese Academy of Sciences.
Abstract (Originalsprache)
The additive manufacturing of hardmetals has attracted great attention recently but faces significant challenges in low printing resolution and low mechanical strength. Herein, the fabrication of hardmetal parts with complex structures and high surface quality by vat photopolymerization assisted with a sintering process has been achieved. This was enabled by in situ polymerization-induced microencapsulation of WC powder, which simultaneously enhances the photocuring ability and sedimentation stability of the WC-Co slurry. The WC powder is microencapsulated by a polystyrene (PS, WC@PS) coating with a thickness of ∼20 nm. The curing depth of the WC-Co slurry with WC@PS was dramatically increased from 32 to 336 μm compared to the slurry with original WC, exhibiting an average increment of 650%. The 3D-printed hardmetal parts exhibited a relative density of 99.5%, a Rockwell hardness of 86.9 HRA, and a surface roughness Ra of 2.26 μm, approaching the theoretical limits in classical powder metallurgy-derived WC-Co hardmetal parts. With high density and hardness, it is shown that a printed drilling bit can easily drill through metal sheets. This work paves a path for the vat photopolymerization 3D printing of miniature complex hardmetal components combined with high surface quality and high performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China.
- School of Materials Science and Engineering, Central South University, Changsha 410083, China.
- China Tungsten and Hightech Materials Co., Ltd., Diamond Road, Zhuzhou 412000, China.
- Casali Center of Applied Chemistry, Institute of Chemistry, The Hebrew University of Jerusalem, Jerusalem 9190401, Israel.
- CAS Key Laboratory of Materials for High Power Lasers, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China.
ORCID-Profile: Kechao Zhou, Jin He, Xiaofeng Wang
Förderung
- State Key Laboratory of Powder Metallurgy
- National Natural Science Foundation of China
- Chinese Academy of Sciences
- Zigong Cemented Carbide Corp., Ltd
Zitieren
APA
Liu, Z., Liu, Z., Zhou, K., Chen, Z., Shi, K., Wang, X., Peng, C., Wang, R., Magdassi, S., He, J., & Wang, X. (2025). Vat Photopolymerization Additive Manufacturing of WC-Co Hardmetals Enabled by In Situ Polymerization-Induced Microencapsulation. ACS Applied Materials & Interfaces, 17(4), 7190-7200. https://doi.org/10.1021/acsami.4c20608
Vancouver
Liu Z, Liu Z, Zhou K, Chen Z, Shi K, Wang X, et al. Vat Photopolymerization Additive Manufacturing of WC-Co Hardmetals Enabled by In Situ Polymerization-Induced Microencapsulation. ACS Applied Materials & Interfaces. 2025;17(4):7190-7200. doi:10.1021/acsami.4c20608
BibTeX
@article{Liu2025,
author = {Liu, Zhanhe and Liu, Zirui and Zhou, Kechao and Chen, Zihang and Shi, Kaihua and Wang, Xinyu and Peng, Chaoqun and Wang, Richu and Magdassi, Shlomo and He, Jin and Wang, Xiaofeng},
title = {Vat Photopolymerization Additive Manufacturing of WC-Co Hardmetals Enabled by In Situ Polymerization-Induced Microencapsulation},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {4},
pages = {7190--7200},
doi = {10.1021/acsami.4c20608}
}
EUVIMED