Self-Supported α-MoB/β-MoB 2 Ceramic Electrodes for Efficient High-Current-Density Hydrogen Evolution in Acidic, Neutral, and Alkaline pH-Values
ACS Applied Materials & Interfaces · 05.02.2025 · 17 (5) · 7739-7749
DOI: 10.1021/acsami.4c18604 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 28.01.2025. Verfasst von Sishi Huang und 8 weiteren Autor:innen. Beteiligte Einrichtung: CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China…. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: Natural Science Foundation of Anhui Province, Chinese Academy of Sciences.
Abstract (Originalsprache)
This paper describes the production and high-current-density hydrogen evolution reaction (HER) performance in the whole pH range (from acidic to basic pH values) of self-supported α-MoB/β-MoB2 ceramic electrodes, aiming for use in industrial electrocatalytic water splitting. Tape-casting and phase-inversion process, followed by sintering, were employed to synthesize self-supported β-MoB2 ceramic electrodes, which exhibited well arranged large finger-like pores, providing numerous active sites and channels for electrolyte entry and hydrogen release. The reaction between β-MoB2 and the sintering aid of MoO3 in situ produces α-MoB/β-MoB2 heterojunctions, which significantly improve the electrocatalytic performance. At a current density of 1000 mA·cm-2, the ceramic electrode manifested an overpotential of 289 mV and 294 mV in acidic and alkaline aqueous solutions, respectively, and a stable operation over time (>100 h). The electrode also performed well in a neutral solution, with an overpotential of 354 mV at 100 mA·cm-2. Theoretical (DFT) calculations demonstrated that the α-MoB/β-MoB2 heterojunction alters the electronic configuration of β-MoB2, favoring an effective electron transfer mechanism; thereby, the adsorption free energy of hydrogen ions is close to zero, and the adsorption and dissociation of water molecules under alkaline and neutral conditions are significantly enhanced.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, P. R. China.
- Department of Materials Science and Engineering, University of Ioannina, GR-451 10 Ioannina, Greece.
ORCID-Profile: Xin Xu
Förderung
- Natural Science Foundation of Anhui Province
- Chinese Academy of Sciences
Zitieren
APA
Huang, S., Huang, A., Huang, H., Tan, C., Yang, Y., Tang, W., Hao, L., Xu, X., & Agathopoulos, S. (2025). Self-Supported α-MoB/β-MoB 2 Ceramic Electrodes for Efficient High-Current-Density Hydrogen Evolution in Acidic, Neutral, and Alkaline pH-Values. ACS Applied Materials & Interfaces, 17(5), 7739-7749. https://doi.org/10.1021/acsami.4c18604
Vancouver
Huang S, Huang A, Huang H, Tan C, Yang Y, Tang W, et al. Self-Supported α-MoB/β-MoB 2 Ceramic Electrodes for Efficient High-Current-Density Hydrogen Evolution in Acidic, Neutral, and Alkaline pH-Values. ACS Applied Materials & Interfaces. 2025;17(5):7739-7749. doi:10.1021/acsami.4c18604
BibTeX
@article{Huang2025,
author = {Huang, Sishi and Huang, Anding and Huang, Haisen and Tan, Chuntian and Yang, Yang and Tang, Wangzhong and Hao, Luyuan and Xu, Xin and Agathopoulos, Simeon},
title = {Self-Supported α-MoB/β-MoB 2 Ceramic Electrodes for Efficient High-Current-Density Hydrogen Evolution in Acidic, Neutral, and Alkaline pH-Values},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {5},
pages = {7739--7749},
doi = {10.1021/acsami.4c18604}
}
EUVIMED