Bioinspired Pyramidal Array Photothermal Structure for Highly Efficient Water Evaporation under Omnidirectional Illumination
ACS Applied Materials & Interfaces · 22.01.2025 · 17 (3) · 4913-4924
DOI: 10.1021/acsami.4c18201 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 07.01.2025. Verfasst von Long Zeng und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, Shenzhen 518055, China. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province, National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation for Distinguished Young Scholars.
Abstract (Originalsprache)
Solar-driven interfacial evaporation is regarded as a green and sustainable strategy to address the global freshwater crisis. Nevertheless, it remains challenging to develop a photothermal structure with highly efficient evaporation under omnidirectional illumination. Herein, a three-dimensional multiscale pyramidal array photothermal structure (PAPS) was developed from the inspiration of durian skin. It consisted of macroscale three-dimensional pyramidal array structures to enhance light absorption and increase the evaporation area, microscale porous structures to ensure continuous water transport and facilitate vapor diffusion, and nanoscale protrusion structures with hybrid photothermal materials of CuxO/C to enhance light trapping and photothermal conversion efficiency. It was fabricated in a porous foam matrix by a facile milling process. The PAPS induced an evaporation rate of 2.08 kg/m2h under one sun illumination under direct light conditions, which was 24% higher than that of a planar photothermal structure. The PAPS maintained fairly good evaporation performance under inclined light conditions, i.e., the evaporation rate of the PAPS was 1.72 kg/m2h at 45° inclined light angle. It only decreased by 17% compared to the direct sunlight conditions, which was much smaller than the 29% decrease of the planar photothermal structure. Additionally, the PAPS present a large evaporation rate of 6.29 kg/m2h under one sun illumination in air convection conditions with a wind speed of 3 m/s. This work provided a high-performance pyramidal array photothermal structure for highly efficient water evaporation under omnidirectional illumination, which provides potential opportunities for stable solar desalination and freshwater supply in complex and variable environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, Shenzhen 518055, China.
ORCID-Profile: Daxiang Deng, Yuchao Bai
Förderung
- Basic and Applied Basic Research Foundation of Guangdong Province
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation for Distinguished Young Scholars
- Shenzhen Stable Support Program of University
Zitieren
APA
Zeng, L., Deng, D., Soad, E. H., Fang, X., & Bai, Y. (2025). Bioinspired Pyramidal Array Photothermal Structure for Highly Efficient Water Evaporation under Omnidirectional Illumination. ACS Applied Materials & Interfaces, 17(3), 4913-4924. https://doi.org/10.1021/acsami.4c18201
Vancouver
Zeng L, Deng D, Soad EH, Fang X, Bai Y. Bioinspired Pyramidal Array Photothermal Structure for Highly Efficient Water Evaporation under Omnidirectional Illumination. ACS Applied Materials & Interfaces. 2025;17(3):4913-4924. doi:10.1021/acsami.4c18201
BibTeX
@article{Zeng2025,
author = {Zeng, Long and Deng, Daxiang and Soad, El Hiak and Fang, Xinqi and Bai, Yuchao},
title = {Bioinspired Pyramidal Array Photothermal Structure for Highly Efficient Water Evaporation under Omnidirectional Illumination},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {3},
pages = {4913--4924},
doi = {10.1021/acsami.4c18201}
}
EUVIMED