EUVIMEDEUVIMED entdecken
Crossref

Understanding the Kinetics of CO 2 Hydrate Formation in Dry Water for Carbon Capture and Storage: X-ray Diffraction and In Situ Raman Studies

Gaurav Vishwakarma iD, Vikas Dhamu, M Fahed Qureshi, Gaurav Bhattacharjee iD, Thalappil Pradeep iD, Praveen Linga iD

ACS Applied Materials & Interfaces · 22.01.2025 · 17 (3) · 4865-4874

DOI: 10.1021/acsami.4c17727 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 09.01.2025. Verfasst von Gaurav Vishwakarma und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore 117580, Singapore. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 61 Literaturangaben. Gefördert von: Indian Institute of Technology Madras, Agency for Science, Technology and Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrate-based carbon capture and storage (HBCS) is a sustainable and promising approach to combating global warming by utilizing water, which is a ubiquitous resource. Here, we report a comprehensive study of CO2 hydrate formation in dry water (DW), a water-in-air dispersion confined in silica particles, for improving the kinetics of hydrate growth. Utilizing a combination of a home-built high-pressure reactor, in situ Raman spectroscopy, and powder X-ray diffraction (PXRD), we elucidate the crystal structure, growth dynamics, and morphology of CO2 hydrates formed in DW, with and without the kinetic hydrate promoter, l-tryptophan. Our analysis reveals that CO2 forms structure I (sI) hydrate in DW, with hydrate growth occurring both on and beneath the silica shell. This results in a substantial increase in CO2 uptake─approximately 2.8 times higher than that observed in pure water (∼134 v/v compared to ∼48 v/v). Moreover, incorporation of l-tryptophan in DW formation markedly accelerates the DW-CO2 hydrate formation process, reducing both the induction time and the time required to achieve 90% gas uptake at 274.65 K. These findings offer crucial insights into the formation of CO2 hydrate in DW, highlighting its potential to improve the efficiency and scalability of HBCS technologies.

Schlagwörter

Stichwörter der Autor:innen

CO2 hydratesRaman spectroscopyX-ray diffractioncarbon capture and storagedry water

Autor:innen und Institutionen

  • Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore 117580, Singapore.
  • DST Unit of Nanoscience (DST UNS) and Thematic Unit of Excellence (TUE), Department of Chemistry, Indian Institute of Technology Madras, Chennai 600036, India.
  • International Centre for Clean Water, IIT Madras Research Park, Chennai 600113, India.

ORCID-Profile: Gaurav Vishwakarma, Gaurav Bhattacharjee, Thalappil Pradeep, Praveen Linga

Förderung

  • Indian Institute of Technology Madras
  • Agency for Science, Technology and Research

Zitieren

APA

Vishwakarma, G., Dhamu, V., Qureshi, M. F., Bhattacharjee, G., Pradeep, T., & Linga, P. (2025). Understanding the Kinetics of CO 2 Hydrate Formation in Dry Water for Carbon Capture and Storage: X-ray Diffraction and In Situ Raman Studies. ACS Applied Materials & Interfaces, 17(3), 4865-4874. https://doi.org/10.1021/acsami.4c17727

Vancouver

Vishwakarma G, Dhamu V, Qureshi MF, Bhattacharjee G, Pradeep T, Linga P. Understanding the Kinetics of CO 2 Hydrate Formation in Dry Water for Carbon Capture and Storage: X-ray Diffraction and In Situ Raman Studies. ACS Applied Materials & Interfaces. 2025;17(3):4865-4874. doi:10.1021/acsami.4c17727

BibTeX
@article{Vishwakarma2025,
  author = {Vishwakarma, Gaurav and Dhamu, Vikas and Qureshi, M Fahed and Bhattacharjee, Gaurav and Pradeep, Thalappil and Linga, Praveen},
  title = {Understanding the Kinetics of CO 2 Hydrate Formation in Dry Water for Carbon Capture and Storage: X-ray Diffraction and In Situ Raman Studies},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {3},
  pages = {4865--4874},
  doi = {10.1021/acsami.4c17727}
}
Kostenlos starten →