EUVIMEDEUVIMED entdecken
Crossref

High-Fidelity Pick-and-Place Transfer Printing of Colloidal Quantum Dot Pixel Arrays via a Composite Stamp

Luohe Zhou, Xuhao Sun, Jiachen Xie, Song Chen iD

ACS Applied Materials & Interfaces · 11.12.2024 · 16 (49) · 68061-68069

DOI: 10.1021/acsami.4c13739 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 27.11.2024. Verfasst von Luohe Zhou und 3 weiteren Autor:innen. Beteiligte Einrichtung: Suzhou Key Laboratory of Novel Semiconductor-optoelectronics Materials and Devices, College of Chemistry, Chemical Engineering and Materials Science,…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Transfer printing can pattern emissive colloidal quantum dot (CQD) arrays with ultrahigh pixel density. However, the most used pick-and-place method has difficulty in achieving high pattern fidelity. Here, we report that the regularly used single-composite stamps cannot combine a low deformation rate and conformal contact, leading to the challenge. In response, we propose a composite stamp for the CQD transfer. Stacked with PDMS of different mechanical parameters, the composite stamp outperforms the single-component stamp composed of soft PDMS (Sylgard184) in deformation resistance and exhibits substantially higher contact conformality than that composed of harder PDMS. As a result, the composite stamp exhibits a 3.21-fold enhancement in transfer yield, delivering a pattern fidelity of 94.0% with a pixel diameter of 1.78 μm and a pixel density of 6350 per inch. The pick-and-place process also produces quantum dot light-emitting diode arrays with the same pattern and reasonable electroluminescence performance. This method provides insight into improving CQD arrays' pattern quality.

Schlagwörter

Stichwörter der Autor:innen

colloidal quantum dotcomposite stamphigh pixel densitypattern fidelitytransfer printingwork of adhesion

Autor:innen und Institutionen

  • Suzhou Key Laboratory of Novel Semiconductor-optoelectronics Materials and Devices, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, Jiangsu 215123, China.
  • Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou, Jiangsu 215123, China.

ORCID-Profile: Song Chen

Förderung

  • National Key Research and Development Program of China
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Zhou, L., Sun, X., Xie, J., & Chen, S. (2024). High-Fidelity Pick-and-Place Transfer Printing of Colloidal Quantum Dot Pixel Arrays via a Composite Stamp. ACS Applied Materials & Interfaces, 16(49), 68061-68069. https://doi.org/10.1021/acsami.4c13739

Vancouver

Zhou L, Sun X, Xie J, Chen S. High-Fidelity Pick-and-Place Transfer Printing of Colloidal Quantum Dot Pixel Arrays via a Composite Stamp. ACS Applied Materials & Interfaces. 2024;16(49):68061-68069. doi:10.1021/acsami.4c13739

BibTeX
@article{Zhou2024,
  author = {Zhou, Luohe and Sun, Xuhao and Xie, Jiachen and Chen, Song},
  title = {High-Fidelity Pick-and-Place Transfer Printing of Colloidal Quantum Dot Pixel Arrays via a Composite Stamp},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {49},
  pages = {68061--68069},
  doi = {10.1021/acsami.4c13739}
}
Kostenlos starten →