EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

From Wet to Protective: Film Formation in Waterborne Coatings

Abolfazl Arjmandi, Huichao Bi iD, Stefan Urth Nielsen, Kim Dam-Johansen

ACS Applied Materials & Interfaces · 30.10.2024 · 16 (43) · 58006-58028

DOI: 10.1021/acsami.4c09729 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 21.10.2024. Verfasst von Abolfazl Arjmandi und 3 weiteren Autor:innen. Beteiligte Einrichtung: CoaST, Department of Chemical and Biochemical Engineering, Technical University of Denmark (DTU), Building 229, Kgs. Lyngby 2800, Denmark. Die Arbeit wurde bisher 79-mal zitiert (Crossref) und nennt 113 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hempel Fonden.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The importance of anticorrosive coatings cannot be overstated, as they play a vital role in safeguarding assets and infrastructure across various industries. Within this context, the emergence of waterborne (WB) coatings stands out for their paramount significance, offering a sustainable alternative to traditional solvent-based (SB) coatings and addressing pressing environmental concerns. Despite their eco-friendliness, the complexity of their film formation mechanism and the lack of understanding present challenges in enhancing the performance of waterborne coatings for corrosion protection. These coatings are created by dispersing polymers in water, which then form a protective film on a substrate. The process involves stages like water evaporation, particle packing, and polymer interdiffusion, often leading to films with defects and inferior protection against extremely corrosive environments compared to SB coatings. This Review scrutinizes the interplay of factors affecting film formation in application, including coalescing agents, environmental factors, and application conditions. A comparative analysis between SB and WB coatings is also featured to shed light on the performance gap under harsh conditions. This Review discusses analytical techniques for studying film formation, aiming to guide future research toward improving WB coatings' durability and effectiveness. In compiling this collective wisdom, this Review emphasizes the translation of theoretical understanding into practical knowledge, equipping formulators with actionable insights to optimize WB coatings for real-world application and performance.

Schlagwörter

Stichwörter der Autor:innen

anticorrosivecoalescing agentfilm formationlatexwaterborne coating

Autor:innen und Institutionen

  • CoaST, Department of Chemical and Biochemical Engineering, Technical University of Denmark (DTU), Building 229, Kgs. Lyngby 2800, Denmark.
  • R&D Department, Hempel A/S, Lundtoftegaardsvej 91, Kgs. Lyngby 2800, Denmark.

ORCID-Profile: Huichao Bi

Förderung

  • Hempel Fonden

Zitieren

APA

Arjmandi, A., Bi, H., Nielsen, S. U., & Dam-Johansen, K. (2024). From Wet to Protective: Film Formation in Waterborne Coatings. ACS Applied Materials & Interfaces, 16(43), 58006-58028. https://doi.org/10.1021/acsami.4c09729

Vancouver

Arjmandi A, Bi H, Nielsen SU, Dam-Johansen K. From Wet to Protective: Film Formation in Waterborne Coatings. ACS Applied Materials & Interfaces. 2024;16(43):58006-58028. doi:10.1021/acsami.4c09729

BibTeX
@article{Arjmandi2024,
  author = {Arjmandi, Abolfazl and Bi, Huichao and Nielsen, Stefan Urth and Dam-Johansen, Kim},
  title = {From Wet to Protective: Film Formation in Waterborne Coatings},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {43},
  pages = {58006--58028},
  doi = {10.1021/acsami.4c09729}
}
Kostenlos starten →