EUVIMEDEUVIMED entdecken
Crossref

Engineering Asymmetric Strain within C-Shaped CeO 2 Nanofibers for Stabilizing Sub-3 nm Pt Clusters against Sintering

Wanlin Fu iD, Ying Yu, Kuibo Yin iD, Zhihui Li iD, Mingyu Tang, Jilan Tian, Guanzhao Wei, Shiming Zhou iD, Yueming Sun, Yunqian Dai iD

ACS Applied Materials & Interfaces · 11.09.2024 · 16 (36) · 47513-47523

DOI: 10.1021/acsami.4c08126 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 13.08.2024. Verfasst von Wanlin Fu und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Chemical Engineering, Southeast University, Nanjing 211189, P. R. China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: Ministry of Education of the People's Republic of China, National Key Research and Development Program of China, Qinglan Project of Jiangsu Province of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrafine noble metals have emerged as advanced nanocatalysts in modern society but still suffer from unavoidable sintering at temperatures above 250 °C (e.g., Pt). In this work, closely packed CeO2 grains were confined elegantly in fibrous nanostructures and served as a porous support for stabilizing sub-3 nm Pt clusters. Through precisely manipulating the asymmetry of obtained nanofibers, uneven strain was induced within C-shaped CeO2 nanofibers with tensile strain at the outer side and compressive strain at the inner side. As a result, the enriched oxygen vacancies significantly improved adhesion of Pt to CeO2, thereby boosting the sinter-resistance of ultraclose sub-3 nm Pt clusters. Notably, no aggregation was observed even after exposure to humid air at 750 °C for 12 h, which is far beyond their Tammann temperature (sintering onset temperature, below 250 °C). In situ HAADF-STEM observation revealed a unique sintering mechanism, wherein Pt clusters initially migrate toward the grain boundaries with concentrated stain and undergo slight coalescence, followed by subsequent Ostwald ripening at higher temperatures. Moreover, the sinter-resistant Pt/C-shaped CeO2 effectively catalyzed soot combustion (over 700 °C) in a durable manner. This work provides a new insight for developing sinter-resistant catalysts from the perspective of strain engineering within nano-oxides.

Schlagwörter

Stichwörter der Autor:innen

CeO2Ptelectrospun nanofibersinter-resistancestrain

Autor:innen und Institutionen

  • School of Chemistry and Chemical Engineering, Southeast University, Nanjing 211189, P. R. China.
  • SEU-FEI Nano-Pico Center, Key Laboratory of MEMS of Ministry of Education, Southeast University, Nanjing 211189, P. R. China.
  • Hefei National Laboratory for Physics Sciences at the Microscale, University of Science and Technology of China, Hefei 230026, P. R. China.

ORCID-Profile: Wanlin Fu, Kuibo Yin, Zhihui Li, Shiming Zhou, Yunqian Dai

Förderung

  • Ministry of Education of the People's Republic of China
  • National Key Research and Development Program of China
  • Qinglan Project of Jiangsu Province of China
  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China

Zitieren

APA

Fu, W., Yu, Y., Yin, K., Li, Z., Tang, M., Tian, J., Wei, G., Zhou, S., Sun, Y., & Dai, Y. (2024). Engineering Asymmetric Strain within C-Shaped CeO 2 Nanofibers for Stabilizing Sub-3 nm Pt Clusters against Sintering. ACS Applied Materials & Interfaces, 16(36), 47513-47523. https://doi.org/10.1021/acsami.4c08126

Vancouver

Fu W, Yu Y, Yin K, Li Z, Tang M, Tian J, et al. Engineering Asymmetric Strain within C-Shaped CeO 2 Nanofibers for Stabilizing Sub-3 nm Pt Clusters against Sintering. ACS Applied Materials & Interfaces. 2024;16(36):47513-47523. doi:10.1021/acsami.4c08126

BibTeX
@article{Fu2024,
  author = {Fu, Wanlin and Yu, Ying and Yin, Kuibo and Li, Zhihui and Tang, Mingyu and Tian, Jilan and Wei, Guanzhao and Zhou, Shiming and Sun, Yueming and Dai, Yunqian},
  title = {Engineering Asymmetric Strain within C-Shaped CeO 2 Nanofibers for Stabilizing Sub-3 nm Pt Clusters against Sintering},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {36},
  pages = {47513--47523},
  doi = {10.1021/acsami.4c08126}
}
Kostenlos starten →