EUVIMEDEUVIMED entdecken
Crossref

Hysteresis-Free Temperature Sensing with Printable Electronic Skins Made of Liquid Polyisoprene/CNTs

Muthamil Selvan T, Ajay Haridas C P, Sayani Karmakar, Tarak K Patra iD, Titash Mondal iD

ACS Applied Materials & Interfaces · 2024

DOI: 10.1021/acsami.4c06263 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, 2024. Verfasst von Muthamil Selvan T und 4 weiteren Autor:innen. Beteiligte Einrichtung: Rubber Technology Centre, Indian Institute of Technology Kharagpur, Kharagpur 721302, India. Hauptthemen laut MEDLINE: Nanotubes, Carbon, Wearable Electronic Devices, Hemiterpenes, Temperature. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Indian Institute of Technology Kharagpur.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing an electronic skin (e-skin) is becoming popular due to its capability to mimic human skin's ability to detect various stimuli. Mostly, such skins are tactile-based sensors. However, the exploration of nontactile-based sensing capability in the e-skin is still in a nascent stage. Herein, we report an approach toward developing electrical hysteresis- and cross-interference-free nontactile e-skin using liquid polyisoprene with an ultralow concentration of multiwalled carbon nanotubes (ϕ = 0.006 volume fraction) by leveraging the stencil printing technique. The impact of cross-linking the samples was studied. Uncross-linked samples demonstrated higher electrical conductivity than the cross-linked samples. A coarse-grained phenomenological model with molecular dynamics simulation was utilized to investigate filler network formation and percolation that dictate the conductivity of uncross-linked and cross-linked samples. Simulation studies supported the fidelity of the experimental findings. The uncross-linked e-skin demonstrated a higher temperature sensitivity (-1.103%/°C) than the cross-linked e-skin (-0.320%/°C) in the thermal conduction mode. Despite the superior sensitivity of the uncross-linked e-skin, the cross-linked systems demonstrated superior cyclic stability (35 thermal cycles), ensuring reliable sensor readings over extended usage. Judicious choice of encapsulant warranted the cross-linked e-skin sensor to nullify the impact of moisture on signal output, thereby providing cross-interference-free results. The optimized e-skin sample retained a similar thermal sensitivity even when used in the nontactile mode. From the application purview, the utility of the developed sensor was tested successfully for nontactile sensing of human body temperature. Additionally, the sensor was utilized to determine the respiratory profile by integrating the developed sensor into a wearable mask. This study advances nontactile e-skin-based sensing technology and opens new avenues for creating wearable and IoT devices for healthcare and human-machine interactions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Nanotubes, CarbonWearable Electronic DevicesHemiterpenesTemperatureElectric ConductivityHumansButadienesMolecular Dynamics Simulation

Stichwörter der Autor:innen

electronic skinnon-tactile sensingprinted sensorsensortemperature sensor

Substanzen

Nanotubes, CarbonHemiterpenesisopreneButadienes

Autor:innen und Institutionen

  • Rubber Technology Centre, Indian Institute of Technology Kharagpur, Kharagpur 721302, India.
  • Department of Chemical Engineering, Indian Institute of Technology Madras, Chennai 600036, India.

ORCID-Profile: Tarak K Patra, Titash Mondal

Förderung

  • Indian Institute of Technology Kharagpur

Zitieren

APA

Selvan T, M., Haridas C P, A., Karmakar, S., Patra, T. K., & Mondal, T. (2024). Hysteresis-Free Temperature Sensing with Printable Electronic Skins Made of Liquid Polyisoprene/CNTs. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.4c06263

Vancouver

Selvan T M, Haridas C P A, Karmakar S, Patra TK, Mondal T. Hysteresis-Free Temperature Sensing with Printable Electronic Skins Made of Liquid Polyisoprene/CNTs. ACS Applied Materials & Interfaces. 2024. doi:10.1021/acsami.4c06263

BibTeX
@article{SelvanT2024,
  author = {Selvan T, Muthamil and Haridas C P, Ajay and Karmakar, Sayani and Patra, Tarak K and Mondal, Titash},
  title = {Hysteresis-Free Temperature Sensing with Printable Electronic Skins Made of Liquid Polyisoprene/CNTs},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  doi = {10.1021/acsami.4c06263}
}
Kostenlos starten →