Scalable CIGS Solar Cells Employing a New Device Design of Nontoxic Buffer Layer and Microgrid Electrode
ACS Applied Materials & Interfaces · 24.07.2024 · 16 (29) · 37972-37980
DOI: 10.1021/acsami.4c05871 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.07.2024. Verfasst von Inchan Hwang und 14 weiteren Autor:innen. Beteiligte Einrichtung: Photovoltaics Research Department, Korea Institute of Energy Research, Daejeon 34129, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 22 Literaturangaben. Gefördert von: Korea Institute of Energy Research, National Research Foundation of Korea, Korea Institute of Energy Technology Evaluation and Planning.
Abstract (Originalsprache)
The efficiency of copper indium gallium selenide (CIGS) solar cells that use transparent conductive oxide (TCO) as the top electrode decreases significantly as the device area increases owing to the poor electrical properties of TCO. Therefore, high-efficiency, large-area CIGS solar cells require the development of a novel top electrode with high transmittance and conductivity. In this study, a microgrid/TCO hybrid electrode is designed to minimize the optical and resistive losses that may occur in the top electrode of a CIGS solar cell. In addition, the buffer layer of the CIGS solar cells is changed from the conventional CdS buffer to a dry-processed wide-band gap ZnMgO (ZMO) buffer, resulting in increased device efficiency by minimizing parasitic absorption in the short-wavelength region. By optimizing the combination of ZMO buffer and the microgrid/TCO hybrid electrode, a device efficiency of up to 20.5% (with antireflection layers) is achieved over a small device area of 5 mm × 5 mm (total area). Moreover, CIGS solar cells with an increased device area of up to 20 mm × 70 mm (total area) exhibit an efficiency of up to 19.7% (with antireflection layers) when a microgrid/TCO hybrid electrode is applied. Thus, this study demonstrates the potential for high-efficiency, large-area CIGS solar cells with novel microgrid electrodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Photovoltaics Research Department, Korea Institute of Energy Research, Daejeon 34129, Republic of Korea.
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea.
- Graduate School of Carbon Neutrality, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea.
ORCID-Profile: Inchan Hwang, Donghyeop Shin, Joohyung Park, Sejin Ahn, Kwanyong Seo, Kihwan Kim
Förderung
- Korea Institute of Energy Research
- National Research Foundation of Korea
- Korea Institute of Energy Technology Evaluation and Planning
Zitieren
APA
Hwang, I., Lee, M., Lee, A., Jeong, I., Song, S., Shin, D., Park, J., Cho, A., Eo, Y. J., Yoo, J. S., Ahn, S. K., Gwak, J., Ahn, S., Seo, K., & Kim, K. (2024). Scalable CIGS Solar Cells Employing a New Device Design of Nontoxic Buffer Layer and Microgrid Electrode. ACS Applied Materials & Interfaces, 16(29), 37972-37980. https://doi.org/10.1021/acsami.4c05871
Vancouver
Hwang I, Lee M, Lee A, Jeong I, Song S, Shin D, et al. Scalable CIGS Solar Cells Employing a New Device Design of Nontoxic Buffer Layer and Microgrid Electrode. ACS Applied Materials & Interfaces. 2024;16(29):37972-37980. doi:10.1021/acsami.4c05871
BibTeX
@article{Hwang2024,
author = {Hwang, Inchan and Lee, Myounghyun and Lee, Ahreum and Jeong, Inyoung and Song, Soomin and Shin, Donghyeop and Park, Joohyung and Cho, Ara and Eo, Young-Joo and Yoo, Jin-Su and Ahn, Seung Kyu and Gwak, Jihye and Ahn, Sejin and Seo, Kwanyong and Kim, Kihwan},
title = {Scalable CIGS Solar Cells Employing a New Device Design of Nontoxic Buffer Layer and Microgrid Electrode},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {29},
pages = {37972--37980},
doi = {10.1021/acsami.4c05871}
}
EUVIMED