Fungal Attachment-Resistant Polymers for the Additive Manufacture of Medical Devices
ACS Applied Materials & Interfaces · 09.10.2024 · 16 (40) · 54508-54519
DOI: 10.1021/acsami.4c04833 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 30.09.2024. Verfasst von Ling Xin Yong und 12 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Additive Manufacturing, Department of Chemical and Environmental Engineering, University of Nottingham, University Park, Nottingham NG7 2R…. Hauptthemen laut MEDLINE: Candida albicans, Biofilms, Printing, Three-Dimensional. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, University of Nottingham, Biotechnology and Biological Sciences Research Council.
Abstract (Originalsprache)
This study reports the development of the first copolymer material that (i) is resistant to fungal attachment and hence biofilm formation, (ii) operates via a nonkilling mechanism, i.e., avoids the use of antifungal actives and the emergence of fungal resistance, (iii) exhibits sufficient elasticity for use in flexible medical devices, and (iv) is suitable for 3D printing (3DP), enabling the production of safer, personalized medical devices. Candida albicans (C. albicans) can form biofilms on in-dwelling medical devices, leading to potentially fatal fungal infections in the human host. Poly(dimethylsiloxane) (PDMS) is a common material used for the manufacture of medical devices, such as voice prostheses, but it is prone to microbial attachment. Therefore, to deliver a fungal-resistant polymer with key physical properties similar to PDMS (e.g., flexibility), eight homopolymers and 30 subsequent copolymers with varying glass transition temperatures (Tg) and fungal antiattachment properties were synthesized and their materials/processing properties studied. Of the copolymers produced, triethylene glycol methyl ether methacrylate (TEGMA) copolymerized with (r)-α-acryloyloxy-β,β-dimethyl-γ-butyrolactone (AODMBA) at a 40:60 copolymer ratio was found to be the most promising candidate by meeting all of the above criteria. This included demonstrating the capability to successfully undergo 3DP by material jetting, via the printing of a voice prosthesis valve-flap using the selected copolymer.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Centre for Additive Manufacturing, Department of Chemical and Environmental Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, United Kingdom.
- School of Life Sciences, University of Nottingham, University Park, Nottingham NG7 2RD, United Kingdom.
- Nanoscale and Microscale Research Centre, University of Nottingham, University Park, Nottingham NG7 2RD, United Kingdom.
- Advanced Materials Research Group, Department of Chemical and Environmental Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, United Kingdom.
- School of Pharmacy, University of Nottingham, Nottingham NG7 2RD, United Kingdom.
ORCID-Profile: Graham A Rance, Adam A Dundas, Felicity R A J Rose, Morgan R Alexander, Ricky Wildman, Simon V Avery, Derek J Irvine
Förderung
- Engineering and Physical Sciences Research Council
- University of Nottingham
- Biotechnology and Biological Sciences Research Council
Zitieren
APA
Yong, L. X., Sefton, J., Vallières, C., Rance, G. A., Hill, J., Cuzzucoli Crucitti, V., Dundas, A. A., Rose, F. R. A. J., Alexander, M. R., Wildman, R., He, Y., Avery, S. V., & Irvine, D. J. (2024). Fungal Attachment-Resistant Polymers for the Additive Manufacture of Medical Devices. ACS Applied Materials & Interfaces, 16(40), 54508-54519. https://doi.org/10.1021/acsami.4c04833
Vancouver
Yong LX, Sefton J, Vallières C, Rance GA, Hill J, Cuzzucoli Crucitti V, et al. Fungal Attachment-Resistant Polymers for the Additive Manufacture of Medical Devices. ACS Applied Materials & Interfaces. 2024;16(40):54508-54519. doi:10.1021/acsami.4c04833
BibTeX
@article{Yong2024,
author = {Yong, Ling Xin and Sefton, Joseph and Vallières, Cindy and Rance, Graham A and Hill, Jordan and Cuzzucoli Crucitti, Valentina and Dundas, Adam A and Rose, Felicity R A J and Alexander, Morgan R and Wildman, Ricky and He, Yinfeng and Avery, Simon V and Irvine, Derek J},
title = {Fungal Attachment-Resistant Polymers for the Additive Manufacture of Medical Devices},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {40},
pages = {54508--54519},
doi = {10.1021/acsami.4c04833}
}
EUVIMED