Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal
ACS Applied Materials & Interfaces · 03.07.2024 · 16 (26) · 34030-34041
DOI: 10.1021/acsami.4c03935 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 24.06.2024. Verfasst von Vepa Rozyyev und 7 weiteren Autor:innen. Beteiligte Einrichtung: Applied Materials Division, Argonne National Laboratory, Lemont, Illinois 60439, United States. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: Energy Frontier Research Centers.
Abstract (Originalsprache)
The removal of toxic heavy metal ions from water resources is crucial for environmental protection and public health. In this study, we address this challenge by developing a surface functionalization technique for the selective adsorption of these contaminants. Our approach involves atomic layer deposition (ALD) followed by vapor-phase silanization of porous substrates. We utilized porous silica gel powder (∼100 μm particles, 89 m2/g surface area, ∼30 nm pores) as an initial substrate. This powder was first coated with ∼0.5 nm ALD Al2O3, followed by vapor-phase grafting of a thiol-functional silane. The modified powder, particularly in acidic conditions (pH = 4), showed high selectivity in adsorbing Cd(II), As(V), Pb(II), Hg(II), and Cu(II) heavy metal ions in mixed ion solutions over common benign ions (e.g., Na, K, Ca, and Mg). Langmuir adsorption isotherms and breakthrough adsorption studies were conducted to assess heavy metal binding affinity and revealed the order of Cd(II) < Pb(II) < Cu(II) < As(V) < Hg(II), with a significantly higher affinity for As(V) and Hg(II) ions. Time-dependent uptake studies demonstrated rapid removal of heavy metal ions from aqueous environments, with Hg(II) exhibiting the fastest adsorption kinetics on thiol-modified surfaces. These findings highlight the potential of ALD and vapor-phase silanization to create effective adsorbents for the targeted removal of hazardous contaminants from water.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Applied Materials Division, Argonne National Laboratory, Lemont, Illinois 60439, United States.
- Pritzker School of Molecular Engineering, University of Chicago, Chicago, Illinois 60637, United States.
- Advanced Materials for Energy-Water Systems Energy Frontier Research Center, Argonne National Laboratory, Lemont, Illinois 60439, United States.
- Chemical Sciences and Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States.
ORCID-Profile: Rahul Shevate, Seth B Darling, Jeffrey W Elam
Förderung
- Energy Frontier Research Centers
Zitieren
APA
Rozyyev, V., Gao, F., Liu, Y., Shevate, R., Pathak, R., Mane, A. U., Darling, S. B., & Elam, J. W. (2024). Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal. ACS Applied Materials & Interfaces, 16(26), 34030-34041. https://doi.org/10.1021/acsami.4c03935
Vancouver
Rozyyev V, Gao F, Liu Y, Shevate R, Pathak R, Mane AU, et al. Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal. ACS Applied Materials & Interfaces. 2024;16(26):34030-34041. doi:10.1021/acsami.4c03935
BibTeX
@article{Rozyyev2024,
author = {Rozyyev, Vepa and Gao, Feng and Liu, Yining and Shevate, Rahul and Pathak, Rajesh and Mane, Anil U and Darling, Seth B and Elam, Jeffrey W},
title = {Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {26},
pages = {34030--34041},
doi = {10.1021/acsami.4c03935}
}
EUVIMED