EUVIMEDEUVIMED entdecken
Crossref

Constructing 3D Zincophilic Skeleton in Nitrogen-Doped Carbon Hybrid Fibers for Dendrite-Free Zn Anodes

Yang Zhou, Bing Li, Jin Wang, Caiyun Li, Tiantian Tang, Zhengyu Wang, Hongrui Yang, Sen Zhang, Chao Deng iD

ACS Applied Materials & Interfaces · 15.05.2024 · 16 (19) · 24601-24611

DOI: 10.1021/acsami.4c02493 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 06.05.2024. Verfasst von Yang Zhou und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, and College of Chemistry and Chemical Engineering, Harbin Normal…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 46 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Zn dendrite growth and side reactions are two major issues for the practical use of Zn metal anodes (ZMAs). Herein, an N-doped carbon-based hybrid fiber with the 3D porous skeleton and the zincophilic Cu nanoparticles (denoted as Cu@HLCF) is developed for stable ZMAs. The zincophilic Cu particles in the skeleton work as the active sites to facilitate uniform Zn nucleation. Meanwhile, the abundant pores in the framework of the hybrid fibers provide a large space to relieve the structural stress and suppress the dendrite growth. Moreover, the good mechanical characteristics of the hybrid fiber ensure its high potential applications for flexible electronics. Theoretical analysis results disclose the strong interaction between Zn and Cu sites, and experimental results demonstrate the low voltage hysteresis, high reversibility, and dendrite-free behavior of the Cu@HLCF host for Zn plating/stripping. Moreover, the solid-state Zn-ion battery (ZIB) assembled with a Cu@HLCF/Zn anode shows the prominent flexibility, impressively reliability, and outstanding cycling capability. Therefore, this work not only provides a novel design for the efficient and stable Zn metal anode but also promotes the development of flexible power sources for flexible electronics.

Schlagwörter

Stichwörter der Autor:innen

dendrite free behaviorflexible power sourceszinc metal anodezincophilic active sites

Autor:innen und Institutionen

  • Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, and College of Chemistry and Chemical Engineering, Harbin Normal University, Harbin 150025, Heilongjiang, China.
  • College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, Heilongjiang, China.

ORCID-Profile: Chao Deng

Zitieren

APA

Zhou, Y., Li, B., Wang, J., Li, C., Tang, T., Wang, Z., Yang, H., Zhang, S., & Deng, C. (2024). Constructing 3D Zincophilic Skeleton in Nitrogen-Doped Carbon Hybrid Fibers for Dendrite-Free Zn Anodes. ACS Applied Materials & Interfaces, 16(19), 24601-24611. https://doi.org/10.1021/acsami.4c02493

Vancouver

Zhou Y, Li B, Wang J, Li C, Tang T, Wang Z, et al. Constructing 3D Zincophilic Skeleton in Nitrogen-Doped Carbon Hybrid Fibers for Dendrite-Free Zn Anodes. ACS Applied Materials & Interfaces. 2024;16(19):24601-24611. doi:10.1021/acsami.4c02493

BibTeX
@article{Zhou2024,
  author = {Zhou, Yang and Li, Bing and Wang, Jin and Li, Caiyun and Tang, Tiantian and Wang, Zhengyu and Yang, Hongrui and Zhang, Sen and Deng, Chao},
  title = {Constructing 3D Zincophilic Skeleton in Nitrogen-Doped Carbon Hybrid Fibers for Dendrite-Free Zn Anodes},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {19},
  pages = {24601--24611},
  doi = {10.1021/acsami.4c02493}
}
Kostenlos starten →