A p-n-p Configuration Based on the Cuprous Oxide/Silicon Tandem Photocathode for Accelerating Solar-Driven Hydrogen Evolution
ACS Applied Materials & Interfaces · 15.05.2024 · 16 (19) · 25551-25558
DOI: 10.1021/acsami.4c02382 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 02.05.2024. Verfasst von Yongjian Jia und 3 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center for Technology and Equipment of Environmental Deposition, Lanzhou Jiaotong University, Lanzhou 730070, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Support Plan Project of Colleges and Universities in Gansu Province.
Abstract (Originalsprache)
Photoelectrochemical splitting of water into hydrogen is a potential route to motivate the application of solar-driven conversion to clean energy but is regularly limited by its low efficiency. The key to addressing this issue is to design a suitable photocathode configuration for high-efficiency photogenerated carrier separation and transmission to photocathode-surface reaction sites. In this work, we report a Si-Cu2O tandem photocathode featuring a p-n-p configuration for solar-driven hydrogen evolution in an alkaline solution. Driven by this built-in field, the electrons induced from Si were transferred through FeOOH, which acted as electron tunnels, to combine with the holes from Cu2O, triggering more electrons generated from Cu2O to particiate in the surface reaction. Under simulated sunlight, the optimized photocathode achieved and maintained a photocurrent density of -11 mA/cm2 at 0 VRHE in alkaline conditions for 120 min, outperforming the reported tandem cell consisting of Si and Cu2O photocathodes. Our results provide valuable insight into a feasible way to construct an optimized photocathode for efficient solar-driven H2 evolution.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Engineering Research Center for Technology and Equipment of Environmental Deposition, Lanzhou Jiaotong University, Lanzhou 730070, China.
- Key Lab of Opt-Electronic Technology and Intelligent Control of Ministry of Education, Lanzhou Jiaotong University, Lanzhou 730070, China.
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China.
ORCID-Profile: Yongjian Jia
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Support Plan Project of Colleges and Universities in Gansu Province
Zitieren
APA
Jia, Y., Cheng, Y., Zhang, Y., & Ma, J. (2024). A p-n-p Configuration Based on the Cuprous Oxide/Silicon Tandem Photocathode for Accelerating Solar-Driven Hydrogen Evolution. ACS Applied Materials & Interfaces, 16(19), 25551-25558. https://doi.org/10.1021/acsami.4c02382
Vancouver
Jia Y, Cheng Y, Zhang Y, Ma J. A p-n-p Configuration Based on the Cuprous Oxide/Silicon Tandem Photocathode for Accelerating Solar-Driven Hydrogen Evolution. ACS Applied Materials & Interfaces. 2024;16(19):25551-25558. doi:10.1021/acsami.4c02382
BibTeX
@article{Jia2024,
author = {Jia, Yongjian and Cheng, Yangyang and Zhang, Yadi and Ma, Jiangping},
title = {A p-n-p Configuration Based on the Cuprous Oxide/Silicon Tandem Photocathode for Accelerating Solar-Driven Hydrogen Evolution},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {19},
pages = {25551--25558},
doi = {10.1021/acsami.4c02382}
}
EUVIMED