Machine Learning Applied to Electron Beam Lithography to Accelerate Process Optimization of a Contact Hole Layer
ACS Applied Materials & Interfaces · 01.05.2024 · 16 (17) · 22465-22470
DOI: 10.1021/acsami.3c18889 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.04.2024. Verfasst von Rongbo Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: Tsinghua University, National Natural Science Foundation of China.
Abstract (Originalsprache)
Determining the lithographic process conditions with high-resolution patterning plays a crucial role in accelerating chip manufacturing. However, lithography imaging is an extremely complex nonlinear system, and obtaining suitable process conditions requires extensive experimental attempts. This severely creates a bottleneck in optimizing and controlling the lithographic process conditions. Herein, we report a process optimization solution for a contact layer of metal oxide nanoparticle photoresists by combining electron beam lithography (EBL) experiments with machine learning. In this solution, a long short-term memory (LSTM) network and a support vector machine (SVM) model are used to establish the contact hole imaging and process condition classification models, respectively. By combining SVM with the LSTM network, the process conditions that simultaneously satisfy the requirements of the contact hole width and local critical dimension uniformity tolerance can be screened. The verification results demonstrate that the horizontal and vertical contact widths predicted by the LSTM network are highly consistent with the EBL experimental results, and the classification model shows good accuracy, providing a reference for process optimization of a contact layer.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China.
- Institute of Microelectronics of Chinese Academy of Sciences, Beijing 100029, China.
- University of Chinese Academy of Sciences, Beijing 100049, China.
ORCID-Profile: Rongbo Zhao, Xiangming He, Hong Xu
Förderung
- Tsinghua University
- National Natural Science Foundation of China
Zitieren
APA
Zhao, R., Wang, X., Wei, Y., He, X., & Xu, H. (2024). Machine Learning Applied to Electron Beam Lithography to Accelerate Process Optimization of a Contact Hole Layer. ACS Applied Materials & Interfaces, 16(17), 22465-22470. https://doi.org/10.1021/acsami.3c18889
Vancouver
Zhao R, Wang X, Wei Y, He X, Xu H. Machine Learning Applied to Electron Beam Lithography to Accelerate Process Optimization of a Contact Hole Layer. ACS Applied Materials & Interfaces. 2024;16(17):22465-22470. doi:10.1021/acsami.3c18889
BibTeX
@article{Zhao2024,
author = {Zhao, Rongbo and Wang, Xiaolin and Wei, Yayi and He, Xiangming and Xu, Hong},
title = {Machine Learning Applied to Electron Beam Lithography to Accelerate Process Optimization of a Contact Hole Layer},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {17},
pages = {22465--22470},
doi = {10.1021/acsami.3c18889}
}
EUVIMED