Thermoelectric Performance Improvement in the ZrNiSn-Based Composite via Modulating Si Addition
ACS Applied Materials & Interfaces · 21.02.2024 · 16 (7) · 9561-9568
DOI: 10.1021/acsami.3c18607 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 07.02.2024. Verfasst von Chuang Jia und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Southeast University, Nanjing 211189, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China, Jiangsu Key Laboratory for Advanced Metallic Materials, Southeast University, China.
Abstract (Originalsprache)
To ensure optimal performance, ZrNiSn is required to possess a low thermal conductivity and exhibit minimal bipolar effects under high-temperature conditions. This study demonstrates the integration of silicon (Si) at different doping levels into ZrNiSn. The composites consist of secondary phases of in situ ZrNiSi and Si. At a temperature of 873 K, the Seebeck coefficient experiences a 16% increase, despite the charge carrier concentration increasing three times as a result of the electron injection from ZrNiSi. The phenomenon can be elucidated by the introduction of Si, which causes energy filtering and inhibits the flow of minority charge carriers. When the doping levels in n- or p-type Si reach high levels (1019 to 1020 cm-3), the mixed interfaces ZrNiSn/ZrNiSi and ZrNiSn/Si reduce the thermal conductivity by 15%, resulting in a 50% increase in zT. These findings indicate that electron transfer in ZrNiSn can be regulated by precise doping in Si. They also demonstrate that incorporating an optimal p-type semiconductor can enhance the thermoelectric performance of n-type ZrNiSn. Additionally, a novel approach is proposed to separate electrical conductivity and the Seebeck coefficient by designing unique secondary phase interfaces.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Southeast University, Nanjing 211189, China.
- Jiangsu Key Laboratory for Advanced Metallic Materials, Southeast University, Nanjing 211189, China.
- School of Materials Science and Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China.
ORCID-Profile: Chuang Jia, BeiBei Zhu, Li Tao
Förderung
- National Natural Science Foundation of China
- National Key R&D Program of China
- Jiangsu Key Laboratory for Advanced Metallic Materials, Southeast University, China
- Foundation of Shaanxi University of Science & Technology
- Science and Technology Project of Jiangsu Province
Zitieren
APA
Jia, C., Zhu, B., Shi, Y., Shen, Y., Liu, H., Tao, L., Zhang, L., & Xue, F. (2024). Thermoelectric Performance Improvement in the ZrNiSn-Based Composite via Modulating Si Addition. ACS Applied Materials & Interfaces, 16(7), 9561-9568. https://doi.org/10.1021/acsami.3c18607
Vancouver
Jia C, Zhu B, Shi Y, Shen Y, Liu H, Tao L, et al. Thermoelectric Performance Improvement in the ZrNiSn-Based Composite via Modulating Si Addition. ACS Applied Materials & Interfaces. 2024;16(7):9561-9568. doi:10.1021/acsami.3c18607
BibTeX
@article{Jia2024,
author = {Jia, Chuang and Zhu, BeiBei and Shi, Yangyang and Shen, Yaozhen and Liu, Hui and Tao, Li and Zhang, Li and Xue, Feng},
title = {Thermoelectric Performance Improvement in the ZrNiSn-Based Composite via Modulating Si Addition},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {7},
pages = {9561--9568},
doi = {10.1021/acsami.3c18607}
}
EUVIMED