Hydrophobic MOF/PDMS-Based QCM Sensors for VOCs Identification and Quantitative Detection in High-Humidity Environments
ACS Applied Materials & Interfaces · 14.02.2024 · 16 (6) · 7721-7731
DOI: 10.1021/acsami.3c16228 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 30.01.2024. Verfasst von Yunqi Cao und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Control Science and Engineering, Zhejiang University, Hangzhou 310027, China. Die Arbeit wurde bisher 70-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: Key Research and Development Program of Zhejiang Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Metal-organic frameworks (MOFs) have great potential in quartz crystal microbalance (QCM) platforms for volatile organic compound (VOCs) detection and recognition due to their unique properties. However, the MOFs' hydrophilicity degrades performance in high-humidity environments, limiting reliable VOC sensing in complex environments. Herein, we propose a novel VOC virtual sensor array (VSA) using a single QCM sensor with an adsorption layer composed of MIL-101(Cr) MOF and polydimethylsiloxane (PDMS), realizing stable sensing and accurate identification for different VOCs under various relative humidity (RH) conditions. The hydrophobic PDMS layer improves the moisture resistance of the sensor to 4 and 14 times in terms of shifts in resonant frequency and scattering parameters, respectively. In addition, performance is maintained over 2 days of water treatment, demonstrating superior water resistance. The highest sensitivity of 2.68 mdB ppm-1 is achieved for isopropanol detection, with the lowest limit of detection of 20.06 ppm for acetone. Combining resonant signals and lumped parameters, the proposed VSA technique effectively discriminates four VOCs (ethanol, 2-propanol, acetone, and acetonitrile) with a high accuracy of 95.3% under both 60% and 90% RH backgrounds. The studies provide a promising solution for reliable low-concentration VOC detection using QCM sensors in high-humidity environments such as underground spaces.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Control Science and Engineering, Zhejiang University, Hangzhou 310027, China.
ORCID-Profile: Dibo Hou
Förderung
- Key Research and Development Program of Zhejiang Province
- National Natural Science Foundation of China
Zitieren
APA
Cao, Y., Fu, M., Fan, S., Gao, C., Ma, Z., & Hou, D. (2024). Hydrophobic MOF/PDMS-Based QCM Sensors for VOCs Identification and Quantitative Detection in High-Humidity Environments. ACS Applied Materials & Interfaces, 16(6), 7721-7731. https://doi.org/10.1021/acsami.3c16228
Vancouver
Cao Y, Fu M, Fan S, Gao C, Ma Z, Hou D. Hydrophobic MOF/PDMS-Based QCM Sensors for VOCs Identification and Quantitative Detection in High-Humidity Environments. ACS Applied Materials & Interfaces. 2024;16(6):7721-7731. doi:10.1021/acsami.3c16228
BibTeX
@article{Cao2024,
author = {Cao, Yunqi and Fu, Mengyao and Fan, Shuyu and Gao, Chenyang and Ma, Zhiqiang and Hou, Dibo},
title = {Hydrophobic MOF/PDMS-Based QCM Sensors for VOCs Identification and Quantitative Detection in High-Humidity Environments},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {6},
pages = {7721--7731},
doi = {10.1021/acsami.3c16228}
}
EUVIMED