EUVIMEDEUVIMED entdecken
Crossref

Additive Manufacturing for Terahertz Metamaterials on the Dielectric Surface based on Optimized Electrohydrodynamic Drop-on-demand Printing Technology

Hongxiao Gong iD, Jin Huang, Jianjun Wang, Pengbing Zhao, Man Guo, Chaoyu Liang, Dongqiao Bai, Zhuoyi Jiang, Ruibo Li

ACS Applied Materials & Interfaces · 24.01.2024 · 16 (3) · 4222-4230

DOI: 10.1021/acsami.3c15937 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.01.2024. Verfasst von Hongxiao Gong und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Electromechanical Integrated Manufacturing of High-performance Electronic Equipment, Xidian University, Xi'an 710071, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Natural Science Basic Research Program of Shaanxi Province, National Natural Science Foundation of China, Higher Education Discipline Innovation Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The conventional techniques used to fabricate terahertz metamaterials, such as photolithography and etching, face hindrances in the form of high costs, lengthy processing cycles, and environmental pollution. In contrast, electrohydrodynamic (EHD) drop-on-demand (DOD) printing technology holds promise as an additive manufacturing method capable of producing micrometer- and nanometer-scale patterns rapidly and cost-effectively. However, achieving stable large-area printing proves challenging due to issues related to charge accumulation in insulated substrates and inconsistent meniscus vibration. In this paper, a smooth bipolar waveform driving method is proposed aimed at solving the problems of charge accumulation on insulated substrates and poor print consistency. The method involves utilizing driving waveforms with opposite polarities for neighboring droplets, allowing the charges carried by the printed droplets to neutralize each other. Moreover, extending the duration of the high voltage rise and fall times enhances the consistency of meniscus motion, thereby improving the stability of printing. Through optimization of the printing parameters, droplets with a diameter of 1.37 μm and straight lines with a width of 3 μm were printed. Furthermore, this approach was employed to print terahertz metamaterial surface devices, and the performance of the metamaterial is in good agreement with the simulation results. These findings demonstrate that the method greatly improves the stability of EHD DOD printing, thereby advancing the application of the technology in additive processing at the micro- and nanoscale.

Schlagwörter

Stichwörter der Autor:innen

charge accumulationdrop-on-demand (DOD) printingelectrohydrodynamics (EHD)smooth bipolar waveformwaveform-driven

Autor:innen und Institutionen

  • State Key Laboratory of Electromechanical Integrated Manufacturing of High-performance Electronic Equipment, Xidian University, Xi'an 710071, China.

ORCID-Profile: Hongxiao Gong

Förderung

  • Natural Science Basic Research Program of Shaanxi Province
  • National Natural Science Foundation of China
  • Higher Education Discipline Innovation Project
  • Xi'an Science and Technology Plan Project
  • Shaanxi Key Industry Chain Project
  • Shaanxi Innovation Team Project

Zitieren

APA

Gong, H., Huang, J., Wang, J., Zhao, P., Guo, M., Liang, C., Bai, D., Jiang, Z., & Li, R. (2024). Additive Manufacturing for Terahertz Metamaterials on the Dielectric Surface based on Optimized Electrohydrodynamic Drop-on-demand Printing Technology. ACS Applied Materials & Interfaces, 16(3), 4222-4230. https://doi.org/10.1021/acsami.3c15937

Vancouver

Gong H, Huang J, Wang J, Zhao P, Guo M, Liang C, et al. Additive Manufacturing for Terahertz Metamaterials on the Dielectric Surface based on Optimized Electrohydrodynamic Drop-on-demand Printing Technology. ACS Applied Materials & Interfaces. 2024;16(3):4222-4230. doi:10.1021/acsami.3c15937

BibTeX
@article{Gong2024,
  author = {Gong, Hongxiao and Huang, Jin and Wang, Jianjun and Zhao, Pengbing and Guo, Man and Liang, Chaoyu and Bai, Dongqiao and Jiang, Zhuoyi and Li, Ruibo},
  title = {Additive Manufacturing for Terahertz Metamaterials on the Dielectric Surface based on Optimized Electrohydrodynamic Drop-on-demand Printing Technology},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {3},
  pages = {4222--4230},
  doi = {10.1021/acsami.3c15937}
}
Kostenlos starten →