EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Boosting the Interfacial Stability of the Li 6 PS 5 Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte

Gashahun Gobena Serbessa, Bereket Woldegbreal Taklu iD, Yosef Nikodimos iD, Nigusu Tiruneh Temesgen, Zabish Bilew Muche, Semaw Kebede Merso, Tsung-I Yeh, Ya-Jun Liu, Wei-Sheng Liao, Chia-Hsin Wang, She-Huang Wu, Wei-Nien Su iD und 2 weitere

ACS Applied Materials & Interfaces · 28.02.2024 · 16 (8) · 10832-10844

DOI: 10.1021/acsami.3c14763 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 15.02.2024. Verfasst von Gashahun Gobena Serbessa und 13 weiteren Autor:innen. Beteiligte Einrichtung: Nano-electrochemistry Laboratory, Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei City 106, Taiwan. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Academia Sinica, National Science and Technology Council, Ministry of edutation, Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to its good mechanical properties and high ionic conductivity, the sulfide-type solid electrolyte (SE) can potentially realize all-solid-state batteries (ASSBs). Nevertheless, challenges, including limited electrochemical stability, insufficient solid-solid contact with the electrode, and reactivity with lithium, must be addressed. These challenges contribute to dendrite growth and electrolyte reduction. Herein, a straightforward and solvent-free method was devised to generate a robust artificial interphase between lithium metal and a SE. It is achieved through the incorporation of a composite electrolyte composed of Li6PS5Cl (LPSC), polyethylene glycol (PEG), and lithium bis(fluorosulfonyl)imide (LiFSI), resulting in the in situ creation of a LiF-rich interfacial layer. This interphase effectively mitigates electrolyte reduction and promotes lithium-ion diffusion. Interestingly, including PEG as an additive increases mechanical strength by enhancing adhesion between sulfide particles and improves the physical contact between the LPSC SE and the lithium anode by enhancing the ductility of the LPSC SE. Moreover, it acts as a protective barrier, preventing direct contact between the SE and the Li anode, thereby inhibiting electrolyte decomposition and reducing the electronic conductivity of the composite SE, thus mitigating the dendrite growth. The Li|Li symmetric cells demonstrated remarkable cycling stability, maintaining consistent performance for over 3000 h at a current density of 0.1 mA cm-2, and the critical current density of the composite solid electrolyte (CSE) reaches 4.75 mA cm-2. Moreover, the all-solid-state lithium metal battery (ASSLMB) cell with the CSEs exhibits remarkable cycling stability and rate performance. This study highlights the synergistic combination of the in-situ-generated artificial SE interphase layer and CSEs, enabling high-performance ASSLMBs.

Schlagwörter

Stichwörter der Autor:innen

dendrite suppressionin situ LiF generationinterfacial stabilitylithium metal anodesolid-state batterysolvent-free solid sulfide composite electrolyte

Autor:innen und Institutionen

  • Nano-electrochemistry Laboratory, Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei City 106, Taiwan.
  • Battery Research Center of Green Energy, Ming-Chi University of Technology, New Taipei City 24301, Taiwan.
  • Nano-electrochemistry Laboratory, Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei City 106, Taiwan.
  • National Synchrotron Radiation Research Center (NSRRC), Hsinchu 30076, Taiwan.
  • Sustainable Electrochemical Energy Development (SEED) Center, National Taiwan University of Science and Technology, Taipei City 106, Taiwan.
  • Department of Chemical Engineering, Ming Chi University of Technology, New Taipei City 24301, Taiwan.

ORCID-Profile: Bereket Woldegbreal Taklu, Yosef Nikodimos, Wei-Nien Su, Chun-Chen Yang, Bing Joe Hwang

Förderung

  • Academia Sinica
  • National Science and Technology Council
  • Ministry of edutation, Taiwan

Zitieren

APA

Serbessa, G. G., Taklu, B. W., Nikodimos, Y., Temesgen, N. T., Muche, Z. B., Merso, S. K., Yeh, T. I., Liu, Y. J., Liao, W. S., Wang, C. H., Wu, S. H., Su, W. N., Yang, C. C., & Hwang, B. J. (2024). Boosting the Interfacial Stability of the Li 6 PS 5 Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte. ACS Applied Materials & Interfaces, 16(8), 10832-10844. https://doi.org/10.1021/acsami.3c14763

Vancouver

Serbessa GG, Taklu BW, Nikodimos Y, Temesgen NT, Muche ZB, Merso SK, et al. Boosting the Interfacial Stability of the Li 6 PS 5 Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte. ACS Applied Materials & Interfaces. 2024;16(8):10832-10844. doi:10.1021/acsami.3c14763

BibTeX
@article{Serbessa2024,
  author = {Serbessa, Gashahun Gobena and Taklu, Bereket Woldegbreal and Nikodimos, Yosef and Temesgen, Nigusu Tiruneh and Muche, Zabish Bilew and Merso, Semaw Kebede and Yeh, Tsung-I and Liu, Ya-Jun and Liao, Wei-Sheng and Wang, Chia-Hsin and Wu, She-Huang and Su, Wei-Nien and Yang, Chun-Chen and Hwang, Bing Joe},
  title = {Boosting the Interfacial Stability of the Li 6 PS 5 Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {8},
  pages = {10832--10844},
  doi = {10.1021/acsami.3c14763}
}
Kostenlos starten →