Thermally and Photothermally Triggered Cytocompatible Triple-Shape-Memory Polymer Based on a Graphene Oxide-Containing Poly(ε-caprolactone) and Acrylate Composite
ACS Applied Materials & Interfaces · 08.11.2023 · 15 (44) · 50962-50972
DOI: 10.1021/acsami.3c13584 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 30.10.2023. Verfasst von Junjiang Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.
Abstract (Originalsprache)
Triple-shape-memory polymers (triple-SMPs) are a class of polymers capable of fixing two temporary shapes and recovering sequentially from the first temporary shape to the second temporary shape and, last, to the permanent shape. To accomplish a sequential shape change, a triple-SMP must have two separate shape-fixing mechanisms triggerable by distinct stimuli. Despite the biomedical potential of triple-SMPs, a triple-SMP that with cells present can undergo two different shape changes via two distinct cytocompatible triggers has not previously been demonstrated. Here, we report the design and characterization of a cytocompatible triple-SMP material that responds separately to thermal and light triggers to undergo two distinct shape changes under cytocompatible conditions. Tandem triggering was achieved via a photothermally triggered component, comprising poly(ε-caprolactone) (PCL) fibers with graphene oxide (GO) particles physically attached, embedded in a thermally triggered component, comprising a tert-butyl acrylate-butyl acrylate (tBA-BA) matrix. The material was characterized in terms of thermal properties, surface morphology, shape-memory performance, and cytocompatibility during shape change. Collectively, the results demonstrate cytocompatible triple-shape behavior with a relatively larger thermal shape change (an average of 20.4 ± 4.2% strain recovered for all PCL-containing groups) followed by a smaller photothermal shape change (an average of 3.5 ± 0.8% strain recovered for all PCL-GO-containing groups; samples without GO showed no recovery) with greater than 95% cell viability on the triple-SMP materials, establishing the feasibility of triple-shape memory to be incorporated into biomedical devices and strategies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States.
- Department of Biomedical and Chemical Engineering, Syracuse University, Syracuse, New York 13244, United States.
- Department of Chemical Engineering, Penn State University, University Park, Pennsylvania 16802, United States.
ORCID-Profile: Junjiang Chen, James H Henderson
Förderung
- National Science Foundation
Zitieren
APA
Chen, J., Sun, S., Macios, M. M., Oguntade, E., Narkar, A. R., Mather, P. T., & Henderson, J. H. (2023). Thermally and Photothermally Triggered Cytocompatible Triple-Shape-Memory Polymer Based on a Graphene Oxide-Containing Poly(ε-caprolactone) and Acrylate Composite. ACS Applied Materials & Interfaces, 15(44), 50962-50972. https://doi.org/10.1021/acsami.3c13584
Vancouver
Chen J, Sun S, Macios MM, Oguntade E, Narkar AR, Mather PT, et al. Thermally and Photothermally Triggered Cytocompatible Triple-Shape-Memory Polymer Based on a Graphene Oxide-Containing Poly(ε-caprolactone) and Acrylate Composite. ACS Applied Materials & Interfaces. 2023;15(44):50962-50972. doi:10.1021/acsami.3c13584
BibTeX
@article{Chen2023,
author = {Chen, Junjiang and Sun, Shiyang and Macios, Mark M and Oguntade, Elizabeth and Narkar, Ameya R and Mather, Patrick T and Henderson, James H},
title = {Thermally and Photothermally Triggered Cytocompatible Triple-Shape-Memory Polymer Based on a Graphene Oxide-Containing Poly(ε-caprolactone) and Acrylate Composite},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {44},
pages = {50962--50972},
doi = {10.1021/acsami.3c13584}
}
EUVIMED