EUVIMEDEUVIMED entdecken
Crossref

Na + Preintercalated MoO 3 Microrods for Aqueous Zinc/Sodium Batteries with Enhanced Performance

Jiasheng Yue, Shi Chen, Yahui Wang, Anqi Zhang, Shuqiang Li iD, Xiaomin Han, Zhifan Hu, Ran Zhao iD, Chuan Wu iD, Ying Bai iD

ACS Applied Materials & Interfaces · 29.11.2023 · 15 (47) · 54488-54498

DOI: 10.1021/acsami.3c11398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.11.2023. Verfasst von Jiasheng Yue und 9 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Key Laboratory of Environmental Science and Engineering School of Materials Science & Engineering, Beijing Institute of Technology, Beijing 1…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Layered molybdenum trioxide (MoO3) is being investigated as a cathode material with high theoretical capacity and holds promise for aqueous secondary batteries. Unfortunately, the severe structural degradation of MoO3 and insufficient intrinsic properties hinder its practical application. Herein, a Na+ preintercalation strategy is reported as an effective method to construct cathodes with high performance for aqueous zinc/sodium batteries (AZSBs). Compared with pristine MoO3, the Na+ preintercalated Na0.25MoO3 cathode delivers a reversible capacity of 251.1 mAh g-1 at 1 A g-1, achieves a capacity retention of 79.2% after 500 cycles, and exhibits a high rate capability (121.5 mAh g-1 at 20 A g-1), which is superior to that in most of the previous reports. Through the experimental measurements and density functional theory (DFT) calculations, the preintercalation method could shorten the forbidden band gap and modulate the electronic structure and hence effectively inhibit the structural collapse of MoO3 microrods, induce reversible Na+ insertion, and enhance the discharge potential. This work is of significance for further research on molybdenum-based compounds as cathode materials for aqueous secondary batteries.

Schlagwörter

Stichwörter der Autor:innen

MoO3Na+ preintercalatedaqueous zinc/sodium batterieselectrochemical performanceinterlayer pillars

Autor:innen und Institutionen

  • Beijing Key Laboratory of Environmental Science and Engineering School of Materials Science & Engineering, Beijing Institute of Technology, Beijing 100081, China.
  • Yangtze Delta Region Academy of Beijing Institute of Technology, Jiaxing 314019, China.

ORCID-Profile: Shuqiang Li, Ran Zhao, Chuan Wu, Ying Bai

Förderung

  • China Postdoctoral Science Foundation
  • National Natural Science Foundation of China

Zitieren

APA

Yue, J., Chen, S., Wang, Y., Zhang, A., Li, S., Han, X., Hu, Z., Zhao, R., Wu, C., & Bai, Y. (2023). Na + Preintercalated MoO 3 Microrods for Aqueous Zinc/Sodium Batteries with Enhanced Performance. ACS Applied Materials & Interfaces, 15(47), 54488-54498. https://doi.org/10.1021/acsami.3c11398

Vancouver

Yue J, Chen S, Wang Y, Zhang A, Li S, Han X, et al. Na + Preintercalated MoO 3 Microrods for Aqueous Zinc/Sodium Batteries with Enhanced Performance. ACS Applied Materials & Interfaces. 2023;15(47):54488-54498. doi:10.1021/acsami.3c11398

BibTeX
@article{Yue2023,
  author = {Yue, Jiasheng and Chen, Shi and Wang, Yahui and Zhang, Anqi and Li, Shuqiang and Han, Xiaomin and Hu, Zhifan and Zhao, Ran and Wu, Chuan and Bai, Ying},
  title = {Na + Preintercalated MoO 3 Microrods for Aqueous Zinc/Sodium Batteries with Enhanced Performance},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {47},
  pages = {54488--54498},
  doi = {10.1021/acsami.3c11398}
}
Kostenlos starten →